Headless Horseman  - Articulated Snap-Flex Fidget (Loose Joints)

PumpkinSpine_Loose.stl

Headless Horseman  - Articulated Snap-Flex Fidget (Medium Tightness Joints)

PumpkinSpine_MediumTightness.stl

Headless Horseman  - Articulated Snap-Flex Fidget (Tight Joints)

PumpkinSpine_Tight.stl

Taylor Swift Midnights Coaster

TaylorMidnights.3mf

Hall Squared Optical Illusion HueForge

Square_Illusion_Front_100x100.stl

Cube Optical Illusion HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm



Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to Gray
    At layer #7 (0.64mm) swap to White for the rest.


3D-Cube_Front_200x200.stl

happy halloween gravestone.stl

Spooky Halloween Gravestone Decor: Mark the eerie celebrations with this gravestone wall art, engraved with "Happy Halloween". A hauntingly delightful addition to your October decor. 🎃👻⚰️.

Cloud Strife with Buster Sword Pop Art - Hueforge Hybrid

CloudPopArt.3mf

Hall of Optical Illusion HueForge Art

Hall_of_Illusion_Front_100x100.stl

Giant Oreo HueForge

Oreo_Front_200x200.stl

neanderthal wall art caveman wall decor

Neanderthal Wall Decor: Dive back in time with this striking Neanderthal design. Representing our ancient cousins and a significant chapter in human evolution, this piece serves as a fascinating conversation starter. Great for history enthusiasts, anthropology buffs, or anyone looking to add a touch of prehistoric intrigue to their space. 🌍🔥

neanderthal detail.stl

The Great Wave off Kanagawa Shadow Box

Plate 2.stl

Shy Guy - Skin Walkers - PRESUPPORTED - Illustrated and Stats - 32mm scale			

Shy Guy - running.stl

Glowing Heart Strings

A Glowing Heart String Art

It has two directions of strings, vertical and diagonal to give the impression of glowing.

Print at 0.2mm layer height. If using Bambu Studio set your wall generator to Arachne.

You can also scale it down to 80% and print at 0.16mm layer height.

This is the sinlge colour file. The multicolour files are available to members.

Tardis in Space - Hueforge Hybrid Print

A wibbly wobbly timey wimey model for all the Whovians out here! 

 

This is another Hueforge Hybrid print, where the Tardis ‘pops out’ of the print for a little personality. This print combines Hueforge filament painting methods with traditional 3D printing to create a lovely pop art style print. 

 

**Note: **If you are using the 3MF for one click printing, all settings will have been applied to the model. I used 5 filaments for this on one AMS and swapped one spool out of the AMS when the colour was finished printing for the 5th colour. 

 
**Note 2:** This print also has steep overhangs with no supports. If you're not confident in your printer handling supports with my 3MF file settings, do not use the one-click printing function and import the 3MF file into your slicer and adjust the settings for the ‘Tardis_Export3.STL’ part of the assembly to suit your own supports/overhang settings. 

 

If you are not using the one-click 3MF, the print instructions and recommendations are as follows:

1. This printed without supports, but I enabled slow down for overhangs. This print DOES require your printer / filament to be dialled in to be able to print the overhangs for the Tardis effectively. If you're not confident, I would enable supports. You would not be able to see it or remove it as the supports should only be applied to areas inside the Tardis. 
2. I used a layer height modifier to modify the layer height specific to the Tardis (2.04mm - 33mm) to increase it to 0.16 to speed up the print.
3. I also modified the infill for the the Tardis and the ‘Generic Cube’ to only print at 10% with 4 walls and 4 top and bottom surfaces. 
4. Since this print re-uses the Blue and the Black, if you are using only 1 AMS, I suggest swapping out Slot 3 (should be orange) for the white when you are swapping the colours out. 
5. My recommendation is to have Black, Blue, Orange, Yellow in Slots 1,2,3, and 4 in the AMS, and then swap the orange for white when the orange is done printing. 
6. If you want to use a different colour for the Tardis, then you can swap out the Blue accordingly

**Filament Instructions**
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ Polymaker Starlight Neptune (Blue) Transmission Distance: 1.8
- PLA CC3D Orange Transmission Distance: 7.4
- PLA CC3D  Lemon Yellow Transmission Distance: 8
- PLA Kingroon White Transmission Distance: 8

 

**Swap Instructions:**
- Start with Black
- At layer #8 (0.76mm) swap to Starlight Neptune (Blue)
- At layer #9 (0.84mm) swap to Orange
- At layer #15 (1.32mm) swap to Lemon Yellow
- At layer #17 (1.48mm) swap to White

- At layer #24 (2.04mm) swap to Black

- At layer #27 (2.52mm) swap to Starlight Neptune (for the Tardis!)

Blazefury , Defiler of Frost

Blazefury , Defiler of Frost

As you can see I have printed it out on my Geeetech A10T in PLA ( silk copper and silk silver )


I use Prusa-Slicer , After you load the STL file click on SPLIT TO PARTS , so you can print it in any colour just like I have done . 

Happy Printing .

Tangled Rope Mask -"Tangle" (Sculptober Day 19)

TangledRopeMask.stl

Winter Village

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #4 (0.4mm) swap to Azure Blue
	At layer #9 (0.8mm) swap to White for the rest.


Converse All Stars - Hueforge Print

Converse_Front_200x142.3mf

Jack Skellington Band Poster

A quirky little Halloween print of Jack Skellington as if he's in a pop-punk band. You can replace the green with any colour you think fits, and the Teal with any light colour (grey, beige etc). Have fun! 

 

As with other Hueforge models, an AMS or an MMU is not necessary. All you have to do is set pauses where the filament swaps are being done, and then load the new filament in before resuming the print. 

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA BambuLab Basic BambuLab Green Transmission Distance: 8
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA Kingroon White Transmission Distance: 8

 
**Swap Instructions:**
- Start with Black
- At layer #10 (0.96mm) swap to BambuLab Green
- At layer #17 (1.52mm) swap to Teal
- At layer #23 (2mm) swap to White for the rest.

bandskellington_Front_160x213.3mf

Art

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Headless Horseman - Articulated Snap-Flex Fidget (Loose Joints)

Headless Horseman - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Headless Horseman - Articulated Snap-Flex Fidget (Tight Joints)

Taylor Swift Midnights Coaster

Hall Squared Optical Illusion HueForge

Cube Optical Illusion HueForge

View 13 new models

Cloud Strife with Buster Sword Pop Art - Hueforge Hybrid

Hall of Optical Illusion HueForge Art

Giant Oreo HueForge

View 17 new models

The Great Wave off Kanagawa Shadow Box

View 22 new models

Glowing Heart Strings

Tardis in Space - Hueforge Hybrid Print

View 14 new models

Tangled Rope Mask -"Tangle" (Sculptober Day 19)

Winter Village

Converse All Stars - Hueforge Print

Jack Skellington Band Poster