I have the following magnetic door stops: https://www.amazon.com/gp/product/B07QZVQRQD/ Rather than mounting a separate magnet for the door sensor, the door stop magnet can serve a dual purpose. I h

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5227480. I needed a door stopper which would NOT trigger my Nuki smart lock every time the door was opened, unlike the Co

Made this quick printing door stopper. I printed it in full TPU and it works great! You can mix TPU with PLA to achieve this unique look and make everyone jealous you have a 3D Printer ;) Printing Pa

Our dishwasher’s (a Bosch SPS53E18EU) door is either fully closed or half-open and in the way: the door’s spring mechanism pulls it closed if it’s open less than 45°. We like to keep it slightly ajar

Hexagonal door stopper in 3 sizes to suit all your needs! It comes in three different size which are: High → 8cm long, 3 cm high, 3 cm large Short and Low → 8cm long, 1.5cm high, 2.5 cm large Large

Fun and easy print. Simple dump truck design as a door stopper .

I love cute Dinos and this is my latest door stopper. Perfekt for your kids room, even has monster repellant properties. 🔹 DETAILS 🔹 Grippad addable on the underside to hold every door on any fl

Door stopper I made using a model of the Greek Atlas. Print with supports everywhere. 0.1 layer height for maximum quality.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5143659. This is a simple Door Stopper. It was inspired by a kid safety item that I already had but broke with use, s

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5820964. Doorstopper made from TPU.

I Designed this Door Stopper, which has a Lid and you can add sand inside. 😉👉 you can check it in my Youtube video here License: CC BY-NC-ND 4.0

Stop sign door stopper Print Settings Filament: PLA Nozzle: 0.4mm Resolution: 0.2mm Infill: 5-15% Rafts: Doesn't Matter Supports: Doesn't Matter

So that... I was looking to create a door blocker for my bedroom because of the wind. And that's when my mind went to peanuts (that's what we say in France ^^') I imagined a ball, here Mr. Ball, ge

A mini traffic cone door stop. Just fill it with anything that’ll give it some weight and it'll stop any door in its way

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5680011. This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/8qfeKpldu2p

This is a model of building bricks melting to form a door stop. It is modeled to look like building bricks are melting under the door. It took me a little over an hour to model this is onshape. I love

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5445135. This is a door holder/stopper my dad asked me to create for him since his broke. Hopefully, it can fit your boat

Knock, Knock. Who's there? Gregor! Gregor the Gargoyle lost his head, but don't worry it is going to good use! This model is a remix of the Gregor the Gargoyle statue

Halloween door decoration. Join my membership plan and get commercial to sell the prints of all my designs.

A sliding door lock that is very strong and as unobstructive as possible (hides in the corner). Insert the bolt in the bottom hole, push it to the end and give it a twist (so it doen's fall down). Rev

Slice and print.

Just a door handle with countersunk holes for screws

Halloween door decoration. Join my membership plan and get commercial to sell the prints of all my designs.

This Jeep Wrangler Door Handle Inserts requires adhesive tape to attach, NO DRILLING REQUIRED. You can warm insert in hot water or use heat gun to form to the slight curve of door handle. I used a

Slice and print.

Halloween door decoration. Join my membership plan and get commercial to sell the prints of all my designs.

Clean simple and elegant Burn Door Handle! The combination of practicality and decor! Made with pegs to hide to screw for that clean look. Printing primiters: I recommend adding additional walls an

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4946179. I saw the ninja lock (genius), and a "rounded" aesthetic version, and a 40mm version, but nobody has made a roun

This mount is engineered to fit seamlessly over your closet door, serving as a highly effective basis for a multi-board system. The mount comes with the Part A Snap, and for added stability, you can a

Loved this print by @Mikencks on Thingiverse but needed a thin profile for low door clearances. His doorstop is a remix of @Huanksta Yoda bookend https://www.thingiverse.com/thing:2950013 This was my

Hexagons for your CAN... agon. The BigTreeTech SB2240 and SB2209 (EBB CAN Boards) allow for clean wiring & fine control with a StealthBurner toolhead on various Voron 3D printers. However these b

Bluey themed do not disturb door sign

Portal to … Poo There is not much of an eloquent way to say this, but cats have to use the restroom too! This design is a trim bezel to go around the opening of an access hole for a hidden litter

This hook is designed to give you 4 places to hang whatever you want! Simply add two to each bi-fold door in your home for 8 more places to hang your coats, umbrellas, leashes, and backpacks! Prints

Are you having the same problem with your Rivian compressor door flapping open when driving? I was, so I built this 3D print that goes into the gear guard cable spot, and holds the flap from opening.

Use this pin on the top corners of your Multibin Shells to prevent the drawers from falling out when being opened. Learn more about this part at https://multiboard.io/knowledge-hub **Printing Guidel

This simple model caps a door knob to make it harder for a child to turn. It prints and snaps well in PLA. It is designed to cap a door knob 48 mm in diameter and 23 mm deep. Scale accordingly to your

If you are on TikTok you more than likely saw the 'Hawk Tuah' girl. Well since I've done other door hangers I figured I'd jump on the 'Hawk Tuah' train. This is perfect for a gag gift or to let everyo

Hey all! Hope you like this second Halloween release! This is the Pumpkin Door Knocker! I wanted to make something unique that will stand out and also be super visible, so I think this one can do the

just a simple, but functional door hook that can be used on any door or ledge to hang your coats, clothes or bags. printed in 2 parts and requires no supports or rafts, and only a tiny bit of bridgin

Build in one go and print in place design, 608 bearing weighted door closer. Add weight to your specific door yourself (i used screws for weights in my photo. Doesn't fully shut your door (pets can st

THE HORROR DEN WALL SIGN DOOR GIFT FOR HORROR DECOR FAN

Galileo Loved Geometry... or something. This is a remix of my own design, the “Hex Cable Door for BigTreeTech SB2240 / 2209 StealthBurner PCB”, designed to fit a Voron

This vampire cat is actually very friendly and brought you a mouse to hang from your door or wall. Some assembly is required. The small cylinder connects the mouse tail together, if the cylinder is

Halloween door decoration. Join my membership plan and get commercial to sell the prints of all my designs.

Designed a simple over door hook for bathroom towels. Fits over doors <36mm thick. Printed in PLA+ with 2.4mm walls and 50% infill. Might be overkill but its very sturdy. Added 2nd version to fit ov

Halloween door decoration. Join my membership plan and get commercial to sell the prints of all my designs.

This part stops the Multibin Drawer from sliding out of the Bin. It is spaced in between the Base and the Faceplate as shown in the images. Learn more about this part at https://multiboard.io/knowled