This is a stand I designed for a Prusa MK build plate. I designed it to display my Ember Prototypes build plate when not in use. Im not sure if it will fit other build plates besides the Prusa MK series but feel free to try! I designed it with the hexagon pattern because it saves on print time and material as well as hexagons are the bestagons! I made it to be able to print nicely so you will have to glue the parts together. You will need 2 side brackets and at least one brace part as well.

Display Stand for Prusa MK Plate

Stand for Prusa Plate V3.step

This is a replacement for a PD Showermate. This is a clip that hooks onto a PD Catheter while you are showering to keep the catheter from dangling. This specific one is for a baxter catheter. The first one broke because the clip snapped. I went through 3 prototypes till I finalized the design. I started trying to model it my own way and then decided that the design was good already. I started with the white model and it worked, it just needed some further modifications. I ended with the yellow model. I have also included a picture of what the product looks like from the website. (I had already thrown the broken one away by the time I published this.)

Dialysis Shower Clip For Catheter 

Dialysis_Shower_Clip_V3.stl

Dialisys_Shower_Clip_V1.stl

This is a 3D Printed can coozy. I have separated models apart for red white and blue. I have also included all the parts individually in case you wanted to do more than 3 colors.

4th of July Can Coozy

4th of July Can Coozy White.stl

This is a mount for building bricks, that slides into the T-Slot aluminum. I used to use it to mount figures to my different creality printers so I can tell their Octoprints apart. You can use this for any function you would like, such as adding the capability for building bricks to be used on robots.

Building Brick T Slot Mount

Lego T-Slot Mount.stl

This is for mounting the steam deck on the back of a headrest in a car. It is adjustable to be able to accommodate many different cars. The way it works is that you put the hooks onto the headrest posts, then with the steam deck attached to the clip, slide the clip into the mounts. You will need to print 2 Arms and 1 Clip. UPDATE 5/29/23 I have found that putting some cut up nonslip sheet (the kind of stuff you put in toolboxes) in-between the steam deck and the clip helps it to not slide around as much.

Steam Deck Car Headrest Mount

Steam Deck Car Mount Clip copy.stl

This is a model of a Baxter Home PD Machine. PD stands for Peritoneal Dialysis. This machine allows people to do dialysis overnight at home. I was on dialysis for a while and since I had this machine in my house I decided to 3D model a replica to 3D print. I later gave this model to my dialysis clinic when I ended up getting a kidney transplant.

Baxter Machine for PD

Baxter Machine.stl

These are Lorcana damage tokens. I designed them because the cardboard tokens were hard to pick up. There are -1 and -3 tokens with raised lettering so they can be printed with 2 colors with just a filament change. I also have designed them  in multi-parts so they can be printed with a multicolor printer. The multicolor ones are not raised lettering. Instead they are flat with the outline and number as separate models.

Lorcana Tokens

Lorcana Token 3.stl

Lorcana Token 3 Multicolor P2.stl

Lorcana Token 3 Multicolor P3.stl

Lorcana Token 3 Multicolor P1.stl

Lorcana Token 1 Multicolor P2.stl

Lorcana Token 1 Multicolor P3.stl

Lorcana Token 1 Multicolor P1.stl

This is a model of the Portal Gun, from the video game Portal 2. I have worked on and off on this for a while now. I have all the parts designed. the only thing is, I haven't scaled them properly. This has been a fun project. I probably won't be updating this anymore.

Portal Gun

Portal Gun - Blaster.stl

This is a Raspberry Pi case I designed to be a snap fit and still be able to be taken apart easily. It is designed to be printed in 2 parts. I designed it to have a button on the case for the power button. I still haven't figured that part out so if you're having trouble with it fitting, try to cut the button off. This was printed on my MK3.9 with stock settings and no support. The only settings I changed are the temps for the filament and infill I set to 10%. You will need to orient the parts to fit your printer correctly. I didn't design it top up so they are on the side when you upload them into the slicer. I have also included my prototypes.

 

Update 3/25/24

I have updated the button as well as added another snap to help the llid to not want to twist out of place. The button still isn't perfect, for me it snapped off.

RPi 5 Case

RPi 5 Case Bottom V2.stl

RPi 5 Case Bottom.stl

This is a model of building bricks melting to form a door stop. It is modeled to look like building bricks are melting under the door. It took me a little over an hour to model this is onshape. I love building bricks and I thought it would be a fun design to make. It is not compatible with building bricks, however it is designed to look like scaled up building bricks.

Brick Door Stopper

Brick Door Stopper.stl

Lorcana Token 1.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

onua5280

Achievements

Seedling

Pinned models

Lorcana Tokens

Display Stand for Prusa MK Plate

Dialysis Shower Clip For Catheter

4th of July Can Coozy

Building Brick T Slot Mount

Steam Deck Car Headrest Mount

Baxter Machine for PD

Lorcana Tokens

Portal Gun

RPi 5 Case

Brick Door Stopper