Universal PTFE Tube Jig
1.6K downloads · 5 years ago · Makes hotend tubes 25mm to 55mm long.
Print with 0.4mm nozzle and typical settings.
[Step-by-step
This model is restricted by licensing terms.
View license.
Makes hotend tubes 25mm to 55mm long.
Print with 0.4mm nozzle and typical settings.
BOM:
- 1 M3 square nut (thick or thin)
- 1 40mm M3 screw (socket head, fully threaded)
- Printed parts (typical printing settings)
- 4mm OD, 2mm or 1.9mm ID (Capricorn XS)
Tools:
- Cutter
- Power drill
- Small Philips (+) screw bit or screwdriver
Pre-supported, pre-oriented, built-in supports.
Check my other projects at mihaidesigns.com.
Universal PTFE Tube Jig
5 years ago in and
This model is restricted by licensing terms.
View license.
J1772 EV Charger Cable & Plug Holder
Bundle
Celestial Resonance Planter grateful
Super S Pendant
Bundle
Large Foldable Stand - Multi Angled - Steam Deck / Switch / Mobile Phone / Tablet
Robot Vacuum Ramp – Rug & Threshold Bridge | Anti-Stuck Ramp for Roomba, Roborock, Shark & More | Sm
1/350 Refit Lower Sensor Dome
Transformers Earthrise Optimus Jetpack
Skeletor Head MOTU Classics
Bundle
Router jig FCSII fin plugs
GameDock Pro MagSafe iPhone & Android Charging Base
Bundle
Catwoman
Hordak Head MOTU Classics
Bundle
Router jig FCS fusion fin plugs
Bundle
Lipstick Holder Keychain | Art Toy Bag Charm | Round Lipstick Case | Y2K Cute Accessory | [Omxiu's c
Bundle
Router jig FCS SUP handle
1/350 Refit Torpedo Launcher and Hangar Detail Set
Marking template FCS X2 plugs
Pink Cigarette Box Case
He-man Head MOTU Classics
Bundle
Hi MihaiDesigns can you please upload the file without supports? (mainly at the base) as thats not strong enough for my printer, it ended up falling over
thanks.
I know I’m 3 years late, but for you and anyone else. I had the same issue so I tried a glue stick on my pei sheet and it stuck great!
Thanks for this design! It works great, I will post a make soon! Tomorrow if I remember! :)