Bottle Roller

Roller Assembly v67.step

$5 USB Fisheye Camera

Cheap CMOS Housing - Back.3mf

KlipperScreen Enclosure

Case Base.3mf

NodeMCU with SSD1306 OLED Case

Case.3mf

Raspi4 Case with X735 Board

X735_Pi4_V2_Bottom.stl

LED Light Bar Mount For Round Rods

I decided I was tired of my CR-10 enclosure being dark all the time, so I rummaged up a 24V LED light bar and designed this mount for it.  

I have two different enclosures, with two different frame diameters, 16mm and 14.75mm.  I have included both versions in STL format and the STEP file for those wishing to modify the design for their own use.

I would suggest two of these mounts for each light bar.  The mounts incorporate a steel clip and fastener that is included with the light bar kit, and each mount uses one additional M3x25 SHCS and M3 nylon-insert locknut.

For a standard installation of one lightbar you would require the following:

Bill of Materials
- 12-24V LED Light Bar and Mounting Hardware (the mount was designed to fit one of the lights in this four pack: https://www.amazon.com/dp/B08T8VG75B or equivalent), Quantity 1
- M3x25 SHCS (McMaster 91292A020 (sold qty 100) or equivalent), Quantity 2
- M3 Nylon-Insert Locknut (McMaster 93625A100 (sold qty 100) or equivalent), Quantity 2
- LED Strip Mount, printed, Quantity 2

Refer to the attached images to determine the assembly methods.

I chose to design this part for resin printing, using a toughened resin.  As I printed these on an mSLA printer, I cannot speak to the veracity of this part for FDM printing.  

If one chose to use an FDM I would suggest orienting the rod axis parallel with the printer Z axis, and print with supports.

Activated Carbon HEPA Filter

Filter_Body_x1.stl

TronXY X1 Deluxe Case

X1_Case_Body.stl

Wire Management Clip

This is an exact dimension-for-dimension copy of the wire clips that come with the Creality Ender 5+.  They're super handy, and do a great job of holding wires close to a 2020 extrusion by interfacing with the T-Slot.  I don't have enough of them for all my printers, so I whipped this up as a quick solution.

608 Bearing Idler - Adafruit Heatset Insert Press

CR-10 v3 X-axis Cable Chain

EZStruder modified for soft filaments & TPE

Oven Controller Box with PID and Timer

Camera Mount for Creative Live Cam Sync HD 720

3 inch Desk Grommet (Threaded)

Short Threaded Handle

No Solicitors Sign

Cat Food Lid (66mm)

CR-10 v3 Filament Sensor Relocation Bracket

Dual E3D V6, Independently Height Adjustable Mount for Rostock Max V2 - Locknut Mod

Wide Angle Lens Adapter for Creative Live Cam Sync HD 720

80/20 Extrusion 40 Series (Metric) Wire Management Series

CR-10 v3 Spool Holder Riser Block

Adafruit RPi Zero Case - Solid Cover

Foredom Ring (Replacement for Foredom HP43 Sheath Spring Clip)

40 Series T Nut, M4 Heatset Insert

My Customized Hex Bit Holder100 Hex Bit Holder

Toilet Bolt Cover

BigShot Barrel Mod

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

wpcarver1

Achievements

Seedling

Up and Coming