Tin Can

Tin can container with the divider inserts. 🥫

Suggested print settings for Can:

• Layer height 0.2mm.
• Infill 15%.
• Perimeters: 3.
• No supports are needed but follow the suggested print orientation for ideal results.

Suggested print settings for Divider Inserts:

• Layer height 0.2mm.
• Infill 15%.
• Perimeters: 5 (for strength and aesthetic).
• No supports are needed but follow the suggested print orientation for ideal results.

NOTE Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.

This work is licensed under a Creative Commons (4.0 International License) Attribution—Noncommercial—Share Alike