18650 Springy Battery Holder
14 downloads · 23 days ago · This is a minimal battery holder for an 18650 cell.
Dimensions are optimized for a **0.4mm nozzle**
This is a minimal battery holder for an 18650 cell.
Dimensions are optimized for a 0.4mm nozzle and 0.28mm layer height. Recommended print settings are 4 walls, 0 top/bottom layers and 0 infill, but it should be fine with standard print settings. Ideally position the seam where it doesn’t interfere with the fit between the parts and battery.
After printing just thread electrical wire through the holes and wrap it around each tab to finish.
Update 2026-05-23: Improved first layer adhesion success rate and improved fit between components and battery.
18650 battery holder
Gridfinity 2x1 8x 18650 Battery Holder
Battery holder 18650
3X 18650 Battery Holder
18650 Battery Holders (1.497")
1X 18650 Battery Holder
Extremely Simple 18650 Battery Holder with slots for contacts
18650 4 slot Battery Holder
WLToys 144001 Higher battery holder 1261 battery partition assembly
GoPro Hero+ battery holder (3 batteries)
GoPro Hero+ battery holder (3 batteries)
Tool battery holder for FERM 20V batteries
Packout Wall M12 Battery Holder Quad Mount (Small Batteries)
AA AAA Battery Holder to stack rechargeable batteries
Milwaukee M18 & M12 Battery Holder for Milwaukee Packout – Stores 25x Batteries | Battery Storage
Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)
Multiboard Modular Battery Holders
Packout Wall M12 Battery Holder Quad Mount (Large and Small Batteries)
Minimal 18650 Holder
exactly what i searched for 👍