Meshify 2 Compact Resivoir Pump Combo Mount and Passthrough

SSD Sled to EK XRES 140 Revo Mount - Left (meshed)

Tuxedo Studs - 10mm

When you fit into the intersection of:
1.  Needing to attend a blacktie wedding,
2.  Are too lazy OR don't care enough to order/buy a set of tuxedo studs, and
3.  Have a 3D printer at your disposal
This is the model for you.

Inspired by The Tuxedo studs by JD2jr here: [https://www.thingiverse.com/thing:2812923](url) that I was having trouble printing, these can be printed fat-side-down so you can transfer any surface finish (I'm looking at you, diffraction grating sheets (I my usual mirror/glass)).

These studs print perfectly fine (at least on my Artillery Sidewinder X1) without supports.

They are 10mm in diameter at the front, with a slight bevel to a 9mm actual front surface. The thin back side is 8.5mm so they may fit through the shirt button holes.

Hope this helps out some wanna-be-penguin (like me) ;-P

Volcano Nozzle x9, Gridfinity 1x1


This will fit 9 Volcano nozzles. The heads sit above the platform for better grabability, but below the upper lip so you can stack blocks on top. 

From Zack Freedman:
Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at [https://bit.ly/3E2NxnZ](url)

Parametric source file [https://a360.co/3KZAXs6](url)


**Gridfinity Tips!**

- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Volcano Nozzle x9, Gridfinity 1x1x.5.stl

Gridfinity Pinecil & Tip Holder with some tolerance.stl

This will hold your Pinecil v2 and 5 TS100 Tips in a 1x1 #gridfinity box.

The design is remixed from the work by Waschtl [https://www.printables.com/social/308935-waschtl](url) found here 
[https://www.printables.com/model/266923-gridfinity-pinecil-tip-holder/comments](url)

The tolerances were just a bit too tight for me and it took too much force/filing to get things to fit without modification.

From Zack Freedman:
Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at [https://bit.ly/3E2NxnZ](url)

Parametric source file:
[https://a360.co/3KZAXs6](url)

This holder stores a Mitutoyo Absolute Digimatic Series 500 caliper and a pair of SR44 batteries in a bare minimum of desk space. By sticking the caliper straight up, the contoured socket protects the jaws from damage and fits 6", 12", and all sizes.

This block has a high center of gravity, so I strongly recommend mounting it to a weighted baseplate using magnets or screws!

**Gridfinity Tips!**

- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Caliper Holder, Husky 6in, Gridfinity 1x2

Stash your measuring bois on your Gridfinity modular workshop storage system, Excalibur style.

Remixed from Zack Freedman's design here: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Caliper%20Holder-62216 
It probably wasn't necessary, but I made a few dimensions ever so slightly wider.

#Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source file:
https://a360.co/3KZAXs6

This holder stores a Mitutoyo Absolute Digimatic Series 500 caliper and a pair of SR44 batteries in a bare minimum of desk space. By sticking the caliper straight up, the contoured socket protects the jaws from damage and fits 6", 12", and all sizes.

This block has a high center of gravity, so I strongly recommend mounting it to a weighted baseplate using magnets or screws!

Gridfinity Tips!

- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Caliper Holder, Husky 6in

13 Needle File Holder, Gridfinity 1x1

Store 13 Needle files (handles around 5.5mm) vertically in a 1x1 gridfinity cube. Relatively high center of gravity, so you may want to use magnets on a weighted base, I'm just yoloing it until _a friend_ knocks it over and spills it everywhere

Derived from Zach Freedman's parametric #Gridfinity modular workshop storage system

Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source file:
https://a360.co/3KZAXs6

This holder stores a Mitutoyo Absolute Digimatic Series 500 caliper and a pair of SR44 batteries in a bare minimum of desk space. By sticking the caliper straight up, the contoured socket protects the jaws from damage and fits 6", 12", and all sizes.

This block has a high center of gravity, so I strongly recommend mounting it to a weighted baseplate using magnets or screws!

Gridfinity Tips!

All storage blocks are compatible with all baseplates!
Most storage blocks are stackable!
You can add 6x2mm magnets to the corners! They won't magnetize the contents.

As my username points out, I'm usually _up all night_ working on any number of thangs...

If you feel the desire to contribute to my caffeine habit keeping me upaulnight designing and sharing things, feel free to [buy me a coffee](https://www.paypal.com/donate/?business=L8CXXNMS3A8X2&no_recurring=0&item_name=Buy+me+coffee+so+I+can+stay+upaulnight+to+keep+designing+and+developing%21%E2%98%95&currency_code=USD)

I'm also over at thingiverse:
https://www.thingiverse.com/upaulnight

upaulnight

Achievements

Seedling

Up and Coming

Voyager