Description of a Small Part Sorting Tray and Spatula
A small parts counting/sorting tray is a tool used to accurately and efficiently count or sort small parts. This kit consists of a flat, rectangular tray with raised edges and a funnel on one side to allow for easy transfer of counted small parts into a container. 

The spatula is a flat, narrow tool used in conjunction with the small parts counting/sorting tray. It helps people with large fingers move, separate, and count small parts without touching them directly. I have included a straight and angled spatula in the kit. The tweezers are included as a bonus tool to help aid in the counting/sorting process.

Rafts:
May help when printing the spatulas

Supports: 
No

Infill: 
10%

Please share your makes!

Small Parts Counting/Sorting Kit

CountingTray.stl

Spatula_Angled.stl

Spatula_Straight.stl

Tweezers.stl

NACC (Not Another Chip Clip)

Do you have the NACC?...

The NACC for organizing that is.  If you have a drawer full of chip clips, bread bag clips, twist ties then you need to throw all those out and use the NACC.  The NACC can be used to securely close chip bags, bread bags, cereal bags, and box liners for cereal boxes and crackers.

Rafts:
Doesn’t matter

Supports: 
No

Resolution:
.2 mm

Infill: 
10%


NACC

NACC.stl

In 3D modeling and 3D printing, fit and tolerances play crucial roles in determining the quality, functionality, and accuracy of the final printed object. Designing for the appropriate fit is critical to ensure that parts can be assembled as intended.  This fit and tolerance kit will account for your printer’s tolerances and help you pick the right fit for your model. Just place the reference block over the raised portion of the test kit to determine the appropriate fit you want for your model.  Offset dimensions are 1mm, .95mm, .9mm, .85mm, .8mm, .75mm, .7mm, .65mm, .6mm, .55mm, .5mm, .45mm, .4mm, .35mm, .3mm, .25mm, .2mm, .15mm, .1mm, and .05mm.

Fit and Tolerance Reference Tester

Fit and Tolerance Reference Tester Round.stl

Fit and Tolerance Round Half.stl

Fit and Tolerance Round Whole.stl

Fit and Tolerance Rectangular Half.stl

Fit and Tolerance Rectangular Whole.stl

Fit and Tolerance Reference Tester Rectangular.stl

These PEI organizers work with the Gridifinity system. They will fit a 1 x 4 or 4 x 1 section of Gridfinity.  These organizers are perfect for standard size printer PEI sheets (approx. 250mm x 250mm) or smaller. They are perfect for storing and organizing A1 and A1 mini PEI sheets. There are two versions. The normal organizer is for smaller sheets and the tall organizer for larger sheets.

WARNING: Larger than 250mm size PEI sheets may cause the organizer to tip over. Storing larger than 250mm x 250mm sheets with this organizer is NOT recommended. For larger sheets use my other PEI found here: https://than.gs/m/1083098


Gridfinity PEI Organizer

Gridfinity PEI Organizer.stl

Gridfinity PEI Organizer Tall.stl

Maker. Builder. Techie. Hobbyist. Geek. Please consider supporting me as a creator either here, Patreon, or buy me a coffee (or pizza) using the provided links. Don't forget to follow or subscribe to my other socials. That is the best place to interact with me.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

sgtporkysbaconpants

Achievements

Voyager

Seedling

Debutant