Celebrate the Fourth of July by downloading and printing this themed fidget toy. It's perfect for those that may need to take their mind off the loud noises during nighttime celebrations.

Have a safe and happy Fourth of July!

Fouth of July Fidget

Fouth of July Fidget.stl

In 3D modeling and 3D printing, fit and tolerances play crucial roles in determining the quality, functionality, and accuracy of the final printed object. Designing for the appropriate fit is critical to ensure that parts can be assembled as intended.  This fit and tolerance kit will account for your printer’s tolerances and help you pick the right fit for your model. Just place the reference block over the raised portion of the test kit to determine the appropriate fit you want for your model.  Offset dimensions are 1mm, .95mm, .9mm, .85mm, .8mm, .75mm, .7mm, .65mm, .6mm, .55mm, .5mm, .45mm, .4mm, .35mm, .3mm, .25mm, .2mm, .15mm, .1mm, and .05mm.

Fit and Tolerance Reference Tester

Fit and Tolerance Rectangular Whole.stl

Easily store and organize your PEI build plates. Tested up to size 310mm x 310mm. It should work with larger sizes too.

Please share your makes! 

PEI Organizer Stand

PEI Organizer Stand.stl

NACC (Not Another Chip Clip)

Do you have the NACC?...

The NACC for organizing that is.  If you have a drawer full of chip clips, bread bag clips, twist ties then you need to throw all those out and use the NACC.  The NACC can be used to securely close chip bags, bread bags, cereal bags, and box liners for cereal boxes and crackers.

Rafts:
Doesn’t matter

Supports: 
No

Resolution:
.2 mm

Infill: 
10%


NACC

NACC.stl

Description of a Small Part Sorting Tray and Spatula
A small parts counting/sorting tray is a tool used to accurately and efficiently count or sort small parts. This kit consists of a flat, rectangular tray with raised edges and a funnel on one side to allow for easy transfer of counted small parts into a container. 

The spatula is a flat, narrow tool used in conjunction with the small parts counting/sorting tray. It helps people with large fingers move, separate, and count small parts without touching them directly. I have included a straight and angled spatula in the kit. The tweezers are included as a bonus tool to help aid in the counting/sorting process.

Rafts:
May help when printing the spatulas

Supports: 
No

Infill: 
10%

Please share your makes!

Small Parts Counting/Sorting Kit

CountingTray.stl

Discover the ultimate 3D model Vacuum Bag Pump Support on thangs.com. This innovative design allows for a gap that enables the pump to move air, increasing efficiency when used in conjunction with a vacuum bag. The setup is simple - just place the 3D printed object directly beneath the vacuum bag's air valve, then position the vacuum pump on top of the air valve, and the pump is ready to remove air from the vacuum bag.

Our Vacuum Bag Pump Support has been successfully tested with the Amolen pump in a kit available for purchase on Amazon. Feel free to share any suggestions or improvements to enhance the design further. The 3D model doesn't require rafts and support, with a recommended resolution of 0.2 mm and infill of 20%.

Take a sneak peek at our 3D model's visuals using the provided images. Experience the easiness of integration and functionality offered by our 3D model Vacuum Bag Pump Support. Trust thangs.com for exceptional 3D models that revolutionize your usage of everyday appliances and contribute to effective problem-solving.

Vacuum Bag Pump Support

This vacuum support provides a gap so the pump can move air. Place the printed object directly under the vacuum bag air valve. Then place the vacuum pump on top of the air valve. Then use the pump to remove air from the vacuum bag.

Tested with the Amolen pump in this kit from Amazon: https://a.co/d/gxAysgv

Please comment with any suggestions to improve the design.

Rafts:
Doesn't Matter

Supports: 
No

Resolution:
.2 mm

Infill: 
20%

Maker. Builder. Techie. Hobbyist. Geek. Please consider supporting me as a creator either here, Patreon, or buy me a coffee (or pizza) using the provided links. Don't forget to follow or subscribe to my other socials. That is the best place to interact with me.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

sgtporkysbaconpants

Pinned models

Fouth of July Fidget

Fouth of July Fidget

Fit and Tolerance Reference Tester

PEI Organizer Stand

NACC

Small Parts Counting/Sorting Kit

Vacuum Bag Pump Support