KWA QRF MOD.1 M12 Speed Loader Adapter.stl 3d model

KWA QRF MOD.1 M12 Speed Loader Adapter.stl

107 downloads · 4 years ago · An adapter for KWA QRF MOD.1 magazines to work in Odin M12 style speed loaders. Prints upright with

Description

An adapter for KWA QRF MOD.1 magazines to work in Odin M12 style speed loaders. Prints upright with no supports. PLA works fine, friction fit with magazine hasn't worn out after many uses.

Print settings: layer height: 0.2 mm nozzle diameter: 0.6 mm hot end: 215 C Bed: 65 C infill: 25%-50% walls: 2 (3 recommended for 0.4 mm nozzles.)

*May work with MP5 magazines, but not tested.

Tags:

Discussions

vinodkumarmedha2 months ago

This dam thing doesn't even fit my gun. Just waste of money and time.

airsoftraiderhd2 years ago

Someone is selling your file without your permission, just FYI:

https://www.hopupairsoft.com/posts/bf90cc01-3133-4d2a-b6ea-b157eb0ebd05?utm_source=hopup_android_app

philmarron2 years ago

Decided to test this adapter with some cyma MP5 midcaps and I can confirm it works as intended with them

Bearsoftme4 years ago

I like this design.. it's simple and solid, and the friction fit holds Mod.1 mags securely. Mp5 mags will fit, but are super loose.

However, the hole at the top is just over 1mm too far forward. The adapter won't fit in my M12. A little love with a file and I'm sure I can get it to fit.

Creality End 5 (with MicroSwiss DD) Tecbears PLA (white) Layer Height: 0.2 mm Nozzle Diameter: 0.4 mm Hot End: 185 C Bed: 50 C infill: 10% walls: 5

seadude454 years ago

Thanks for noting this. I want to fix the offset on the feed hole, but I have a knock off which is slightly different. when you say "just over 1mm too far forward," can you tell me if that is to the left or to the right when looking at the print from the side with text on it?