I decided to do a "high density" version of my pad storage. I say it in quotes because it is not the most efficient or pack the most crap per square inch. If I stood them vertical you could fit twice as many in the same 2 x 3 spot. but I wanted it to feel like it was made for the pads instead of just a slotted cube. and also have yourself room to still label what each pad is, for easy grabbing. I laid them on the side so it fits into a smaller tool chest drawers.

There are a few slot variations, depending on your needs. I feel the 3 slots with offset works well for your pad savers and sponges. the 4 slots for many grits that you have low volume of. I left a no slot one for large bulk of grits or if you want to make your own slot variations! 

Gridfinity- Milwaukee M12 orbital detail sander pad storage, "high density"

m12 orbital sanding pads-Slotted-2 slots.stl

m12 orbital sanding pads-Slotted-3 slots.stl

m12 orbital sanding pads-Slotted-4 slots.stl

m12 orbital sanding pads-Slotted-no slots.stl

I wanted Sanding pad storage for my M12 orbital detail sander that laid them flat and  displays them, instead of most models that put all the pads on the side. 

Its not gonna give you the most storage per square inch, but I think It looks nice for the sanding grits that you may have a lot of and frequently grab.

is 2 x 3 grids big

Gridfinity- Milwaukee M12 orbital detail sander pad storage

I wanted Sanding pad storage for my M12 orbital detail sander that laid them flat and  displays them, instead of most models that put all the pads on the side. 

Its not gonna give you the most storage per square inch, but I think It looks nice for the sanding grits that you may have a lot of and frequently grab.

Gridfinity- M12 orbital detail sander pad storage

Made a cradle for the Milwaukee m12 rotary tool. can hold the tool alone or with an attachment and 1.5 AH battery on it. Made it so the tool shouldn't slide or shift out of place and get banged around.

Its a rather large print, so you may need to cut it in your slicer and do it in two parts. 

Feel free to remix/optimize or do whatever to it, since I'm not that great at modeling in freeCAD. you could probably make a shorter version if you don't care about overhanging into other grid slots or having to take everything off the tool.

Gridfinity: Milwaukee m12 rotary tool holder 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bluephox

Achievements

Voyager

Seedling

Gridfinity- Milwaukee M12 orbital detail sander pad storage, "high density"

Gridfinity- Milwaukee M12 orbital detail sander pad storage

Gridfinity: Milwaukee m12 rotary tool holder