Appa Figure - Avatar: The Last Airbender

It's Appa! My son is a huge Avatar fan, so I made this little Appa as a surprise for him & his class.

Print Settings

• Layer Height: 0.2
• Walls: 3
• Infill: 10%
• Slow down for overhangs
• The Appas I printed for goodie bags were done at 60% & the larger is 110%

For multicolor printing

• I recommend using supports for multicolor Appa. Otherwise you will see some drooping on his chin & tail.
• Flushing volume of 0.65 worked well for me. You may want to adjust depending on your colors/what you're comfortable with
• Use flushies (like a fidget cube, bolt, etc) and/or print multiple to reduce your waste

**And thank you for downloading! Hope you love Appa! **