tracking pixel
Liz B

HueForge Sunflower

by
pezliz
Follow
Follow
Remix Model
pezliz
pezliz
|
Image 3 of 3
HueForge Sunflower  3d model
pezliz
pezliz
|
Image 3 of 3
HueForge Sunflower  3d model
2D
3D
Makes
HueForge Sunflower  3d model
HueForge Sunflower  3d model
HueForge Sunflower  3d model

A little experimental - I need some better yellows!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Brown Transmission Distance: 0.5 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyLite Yellow Transmission Distance: 11 PLA PolyLite Pro Light Yellow Transmission Distance: 3

Swap Instructions: Start with Charcoal Black At layer #4 (0.4mm) swap to Brown At layer #8 (0.72mm) swap to Sunrise Orange At layer #12 (1.04mm) swap to Yellow At layer #15 (1.28mm) swap to Light Yellow for the rest.


51 Likes39 DownloadsSeptember 20, 2023


51 Likes39 DownloadsSeptember 20, 2023