HueForge Sunflower

A little experimental - I need some better yellows!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Brown Transmission Distance: 0.5 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyLite Yellow Transmission Distance: 11 PLA PolyLite Pro Light Yellow Transmission Distance: 3

Swap Instructions: Start with Charcoal Black At layer #4 (0.4mm) swap to Brown At layer #8 (0.72mm) swap to Sunrise Orange At layer #12 (1.04mm) swap to Yellow At layer #15 (1.28mm) swap to Light Yellow for the rest.