Smiling Eyes Mask by Perihelion Prints

======

Don a perpetual smile with this eerie masquerade mask.

Scaled to fit most adult heads. You may want to do a test print to confirm fit.

For attachment to head, use elastic cord or ribbon. For fitting, place the mask on your face, lining it up with your eyes and the sides of your face.

Measure how much ribbon you'll need to go around your head, then add a bit more and cut two equal halves. Tie a knot at the end of each piece of cord, or glue one to each side of the mask, and use the leftover length to tie both pieces into a knot/bow behind or head. Or you can edit the file to come up with your own solution.

Sculpted in Blender. STL and .blend files included. Dimensions in millimetres.

======

"Ameri" (https://skfb.ly/YZuP) by reizibarrientos is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Bikini Girl" (https://skfb.ly/owoBv) by KillaKali1991 is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Clothes" (https://skfb.ly/6SII8) by longdong is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Dr Sofia - Talking" (https://skfb.ly/oUTzL) by p143467 is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Female Example Model" (https://skfb.ly/6zKTo) by agusmade is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Pink Short Leather Jacket" (https://skfb.ly/oPuVn) by Style3D CG is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

======

0.20mm layer height recommended.

Use supports where appropriate. Depending on the orientation, you may not need that much support material, and you may be able to get away with regular (non-organic) supports.

15% infill tested. PLA recommended.

Filament Usage (estimated): 230g

Printing Time (estimated): 16h30m

^ Estimates based off slicing for Prusa MK3.9. Your mileage may vary.