Kemono Kigurumi Dog Mask Base

Base mask for a kemono/kigurumi fursuit head, vaguely styled after a canine.

Sculpted in Blender. STL and .blend files included. Dimensions in millimetres. Also added "fixed" STL that has already been loaded into PrusaSlicer, scaled, and rotated to fit on the print bed as shown in the preview images.

Some different eye inserts are included, which you can print separately and attach. There is also a combined "with eyes" mesh that includes circular eyes as a part of the mask itself, which may be more beginner friendly.

If you have any questions about dimensions, please reach out prior to or after purchase.

*Not for commercial use/resale/sharing. Please reach out if you would like to purchase a license for commercial use. Thanks :)

======

0.20mm layer height recommended.

Organic supports recommended.

PLA/PETG recommended.

Filament Usage (estimated): 300g

Printing Time (estimated): 22h45m

^ Estimates based off slicing for Prusa MK3.9. Your mileage may vary.

*It just barely fits on the bed of a Prusa MK4 if you orient it slightly sideways as shown. If you have a smaller print, you may need to cut it into sections in your slicer and print one at a time. If you have a larger printer, you may prefer to print it more upwards for less supports and potentially higher strength.

You may also want to edit the .blend file to increase the thickness of the mask. You can find the thickness option under the "Solidify" modifier, then re-export as an STL.