Cyborg Experiment Mask by Perihelion Prints

Ready to print and wear or display. Perfect for parties, cosplay, or as part of a performance costume.

======

Scaled to fit most adult heads. Although it may be a bit big on smaller heads, as shown. You may want to experiment with scaling it down 5-10% to fit your face. Test print recommended.

For attachment to head, use elastic cord or ribbon. Hot glue should work. For fitting, place the mask on your face. Measure how much ribbon you'll need to go around your head, starting from just above the middle "bars" around your ears. Then add a bit more and cut two equal halves. Glue one to each side of the mask, and use the leftover length to tie both pieces into a knot or bow behind or head. Or you can edit the file to come up with your own solution.

Sculpted in Blender. STL and 3MF files included. Dimensions in millimetres.

======

"654230039_avatar_sdk" used in demo render (https://skfb.ly/oZCrV) by 654230039 is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"CBTUP409QH2DAVG5Z8RFOUUYB" used in demo render (https://skfb.ly/pxFuJ) by VITU6018 is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Gothic Girl" used in demo render (https://skfb.ly/oPEAI) by Toni García Vilche is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

======

0.20mm layer height recommended.

Works with PLA, PETG, etc.

Filament Usage (estimated): 58m

Printing Time (estimated): 4h45m

^ Estimates based off slicing for Prusa MK3.9. Your mileage may vary.

======

Organic supports are recommended, as shown in the pictures, provided your slicer supports them.

There is an optimized 3MF included that should be far easier to slice than the STL it was based on. However, your results may vary since the polygon count is far lower, and some small features may be decimated beyond recognition. It should still print absolutely fine, though, and in my tests the artifacts of decimation weren't present in the final print.

Feel free to reach out with any other questions or concerns, prior to or after purchase.