THIS IS THE 3D PRINT FILE ONLY This is a JR Screen Printing Station that is travel sized and easy to use! This is the perfect size for business cards and ACEO/ATC cards! Please continue to read for more information about this build...

There are 5 .stl files included: The base, the platen, the frame, the squeegee handle, and the emulsion coater. Hardware kits are available on my Etsy. www.etsy.com/shop/PencilnMouse

You will also need...

• Super Glue
• Flat Head Screw #8-32 x 2-1/2in (at any hardware store)
• Screw Nut #8-32 (at any hardware store)
• Rubber Band size #30 ish
• The Frame will need: An old screen printing screen _ (I use 200 yellow mesh)_ _ (Superglue the mini frames onto the screen then cut it up when dry)_
• The Squeegee will need: Rubber Gasket strip _ (1 inch tall, 1/8 inch wide, & about 3 inches long)_

Notes:

• The largest piece is the base which is approx. 121mm x 113mm and 90mm tall
• The suggested artwork size is 2.5 x 3.5 inches. Artwork is NOT included.
• Once the frame & mesh are attached, it behaves like any other frame for emulsion/light box or vinyl stencil.
• Multiple frames can be printed & made so they can be easily switched out from the base
• We recommend a small piece of "PrintGrip" instead of sticky spray on the platen
• 3D prints can be sanded down a bit if it doesn't fit perfectly together (it should)
• Screen Printing Tutorials available on my LinkTree: https://linktr.ee/pencil.n.mouse

Copyright of this design belongs to Pencil.n.Mouse. No attribution needed. You may NOT distribute and/or sell the STL file for any reason. This model is NOT available for commercial reselling. Work created as a result from using the screen printer belongs to the artist/screen printer.