I wanted a "wall mount" for my Woodraphic precision square (a much more affordable alternative to Woodpecker squares). This was designed for the 12in version, but, should work just fine for 300mm metric version too. I have not tried it on the 8 inch or 4in, doubt it would work. If someone needs me to modify for the smaller square, please let me know.

Here is a link to the square if you want to pick one up:
https://www.amazon.com/Woodraphic-Precision-Guaranteed-Measuring-Marking/dp/B07DNM93XC?crid=39TKZ1FTQKHJ3&keywords=wood%2Briver%2Bsquare&qid=1656122562&sprefix=wood%2Briver%2Bsquare,aps,99&sr=8-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUE0UTQ3SVhaNTRNNzQmZW5jcnlwdGVkSWQ9QTA1NzcyOTMzRUoyOE05SDhFRkMyJmVuY3J5cHRlZEFkSWQ9QTA1MTgxMDcyTEM0WFZVODZZMkpNJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1&linkCode=sl1&tag=mbueche-20&linkId=7d31ce5dbe7c5e499a35fed18f08e522&language=en_US&ref_=as_li_ss_tl

This model DOES require supports and they are a little tricky to remove, but take your time and use some small precision tools.

**_Notes:_**
This model DOES require supports and they are a little tricky to remove, but take your time and use some small precision tools.

Woodraphic Precision Square Holder

I needed a way to store my Woodraphic carpenter square (much cheaper alternative to a Woodpecker square) on the wall so it was easy to find and put away so I designed this one. Hope it helps others with their organization needs!

Here is a link to the square in case you want one:
https://www.amazon.com/Woodraphic-Professional-Carpenter-Woodworking-Guaranteed/dp/B07GD7RZL6?keywords=posi-lock%2Bt-square&qid=1656123228&sprefix=posi-lock,aps,119&sr=8-15-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyT1QyUDU5MENENVpUJmVuY3J5cHRlZElkPUEwNzAzMTY3TUI4S1BaVU1ENVBZJmVuY3J5cHRlZEFkSWQ9QTA3MTYwMTIzVkNaU0xNS1hERjNIJndpZGdldE5hbWU9c3BfbXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1&linkCode=sl1&tag=mbueche-20&linkId=fb47207a4d32e7093e3f8bae310b33eb&language=en_US&ref_=as_li_ss_tl

**_Notes:_**
You do NOT need supports for this model. I used PLA, but you can use just about any material, PETG is recommended if higher temps or water are likely to be around it.

I really like Overture PLA. I have used dozens of spools little zero issues. It does not make "stringy" stands like other brands. Here is a link if you want to try some:

https://www.amazon.com/OVERTURE-Filament-Consumables-Dimensional-Accuracy/dp/B07PFS2R12?th=1&psc=1&linkCode=sl1&tag=mbueche-20&linkId=ed8acab886e17f2d0b83536de083b01d&language=en_US&ref_=as_li_ss_tl

Woodraphic Carpenter Square Wall Holder Mount

I needed a drill holder for my new Makita 18V Hammer Drill (Model: XPH14Z - should work for the 12Z, also). Most of what I found online was too small (this thing has some small nubs that interfere with other designs)

The font is not exact, I found a similar font to Makita's called Atomicboy online for free and used it. the only subtle difference is the "M". In the Makita logo, the peaks of the m get smaller.

Here is a link to the Drill in case you want one:
https://www.amazon.com/Makita-XPH14Z-Lithium-Ion-Brushless-Driver-Drill/dp/B08VN5TKVR?keywords=makita+xph14z&qid=1655577565&sprefix=makita+XPH,aps,129&sr=8-1&linkCode=sl1&tag=mbueche-20&linkId=124e76da08a3d6bc92484ffaf8fae381&language=en_US&ref_=as_li_ss_tl

Enjoy!

**_Notes:_**
I used the adaptive cubic infill pattern, it was faster and produced excellent results. I also chose PETG material.

This is the filament I used. Not exactly Makita Blue, but pretty close:
https://www.amazon.com/gp/product/B082PFVWS1?ie=UTF8&psc=1&linkCode=sl1&tag=mbueche-20&linkId=a6fa5d8f6a0d8082277605ab410a32d1&language=en_US&ref_=as_li_ss_tl

Makita XPH14Z Hammer Drill Holder

I needed a hanger / holder for my new Makita Driver (Model: XDT16Z). Others that I found online were either too loose or too small.

Hope this helps someone who needs a little shop organization.

If you want to see the driver on amazon, here is a link:
https://www.amazon.com/gp/product/B07N9JBDK5?ie=UTF8&th=1&linkCode=sl1&tag=mbueche-20&linkId=04f86e43fb9dc987460306ff5300f0e7&language=en_US&ref_=as_li_ss_tl

**_Notes:_**
I recommend using PETG as its more durable and water resistant than PLA and gives beautiful results. If all you have is PLA, that, I am sure will work, too. I printed these both at 0.3mm DRAFT and 0.2mm Detail and both came out great. It's just a tool holder, so 0.3mm DRAFT is WAY faster.

No supports are needed with this model if you print it "standing up" as shown in the STL preview.

Here is a link to the filament I used. It was NOT a perfect match for Makita blue, but it was pretty close:
https://www.amazon.com/gp/product/B082PFVWS1?ie=UTF8&psc=1&linkCode=sl1&tag=mbueche-20&linkId=a1fb25b499f65306e8cd233a0f01429b&language=en_US&ref_=as_li_ss_tl

Makita XDT16Z Cordless Drill Holder Hanger

Under Desk or wall mount for a Dell Latitude 7400 series laptop. Does not block the fans or side ports. Easy to print without supports. Through-holes for easy access to mounting screw holes.

UPDATE: Created a Left and Right model so you don't have to mirror the file in your slicer

Dell Latitude Laptop Mount

LaptopHolder_Left.STL

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

michael.bueche

Achievements

Seedling

Debutant

Woodraphic Precision Square Holder

Woodraphic Carpenter Square Wall Holder Mount

Makita XPH14Z Hammer Drill Holder

Makita XDT16Z Cordless Drill Holder Hanger

Dell Latitude Laptop Mount