I needed a drill holder for my new Makita 18V Hammer Drill (Model: XPH14Z - should work for the 12Z, also). Most of what I found online was too small (this thing has some small nubs that interfere with other designs)
The font is not exact, I found a similar font to Makita's called Atomicboy online for free and used it. the only subtle difference is the "M". In the Makita logo, the peaks of the m get smaller.
Here is a link to the Drill in case you want one: https://www.amazon.com/Makita-XPH14Z-Lithium-Ion-Brushless-Driver-Drill/dp/B08VN5TKVR?keywords=makita+xph14z&qid=1655577565&sprefix=makita+XPH,aps,129&sr=8-1&linkCode=sl1&tag=mbueche-20&linkId=124e76da08a3d6bc92484ffaf8fae381&language=en_US&ref_=as_li_ss_tl
Enjoy!
Notes: I used the adaptive cubic infill pattern, it was faster and produced excellent results. I also chose PETG material.
This is the filament I used. Not exactly Makita Blue, but pretty close: https://www.amazon.com/gp/product/B082PFVWS1?ie=UTF8&psc=1&linkCode=sl1&tag=mbueche-20&linkId=a6fa5d8f6a0d8082277605ab410a32d1&language=en_US&ref_=as_li_ss_tl