After getting my soldering set I looked for a tool box that would hold all I need for my kit.  The cases I found allowed only to hold the soldering iron and nibs, but nothing else.  

I need to be able to take this with me, so I needed not only the soldering iron, but solder, wick and flux for the repair jobs I do outside my workshop.

This is fairly big to hold everything, but fits everything I need.  Two 6mm magnets are used to keep the case closed.  Two M3 screws to hold the hinges.

I will probably update this at some point.  I am very new to 3D modeling.  I see areas I would like to improve, but not sure how at this point.  The holders for the magnets is sized 6.2mm, but my print I needed to use a drill to make it fit still.  So depending on your tolerances you probably will not need to do that.

The step file is included so you can revise for your needs.  

Printed on the Bambu X1 Carbon with AMS, you don't need to use two colors.

TS80P Soldering Kit Tool Box

TS80P.stl

Based on Jared596's model for the metric Bondhus drivers, https://www.thingiverse.com/thing:3453740.
I needed a place to put my nippers, pliers and brushes for easy access with my printers.  They all attach to the side of the lack enclosure.  My enclosure is in a place where this one place near all printers works for me.

Step files are included so you can adjust for your needs.  Made in ShapR3D.  Printed on Bambu X1 Carbon.  

Lack Table Holders for Nippers, Pliers and Brushes

Nipper.stl

I needed a PSU holder for the lack table enclosure and the ones I found had the PSU hanging from the top.  I was having issues getting that to work so designed this one that sits on the lower table and attaches to the leg.  This helps when you need to add or change any connections on the PSU, the bottom can stay seated and just unscrew the top section.

Step file is included if you need to adjust for a different PSU.

Meanwell PSU Holder for Lack Table

PSU.stl

This is a combination of BTT’s cover for their 5” touch screen for Ender 3 https://www.thingiverse.com/thing:4457953
And Kiesling’s version 1 tool holder. https://www.thingiverse.com/thing:3577931

I may try to see if his second version will work. The screen cover is fine but a bit wobbly so hoping combining the 2 will make it more stable.  

I used Shapr to do this. 

BTT TFT50 v3 Screen with Tool Holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

lharshbe

Achievements

Seedling

Voyager

TS80P Soldering Kit Tool Box

Lack Table Holders for Nippers, Pliers and Brushes

Meanwell PSU Holder for Lack Table

BTT TFT50 v3 Screen with Tool Holder