MultiBoard Angled Spray Can Holder (5MU)

A clean, space-efficient angled spray can holder designed for the MultiBoard system. This holder stores standard aerosol spray cans at a forward tilt for improved visibility, easier access, and secure retention.

The open-frame design reduces filament usage while maintaining rigidity, and the angled geometry makes it ideal for frequently used workshop or household sprays like glass cleaner, lubricants, spray paint, adhesives, and more.

Features

• Designed for the MultiBoard ecosystem
• 5MU tall form factor
• Angled orientation for easier grab-and-go access
• Lightweight open-frame construction
• Securely holds many standard aerosol spray cans
• Integrated labeling area on top surface
• Clean organic styling that matches modern MultiBoard setups

Compatibility

Confirmed compatible with:

• Sprayway Glass Cleaner
• WD-40 cans
• Most standard spray paint cans

Not compatible with:

• Standard Lysol disinfectant cans (too large in diameter)

Mounting

• Uses 2x push-fit connectors

Compatible hardware:

• 9 mm Big Thread - Flat Head - Push-Fit Hole - Bolt
• 9 mm Big Thread - Push-Fit Hole - Bolt

Printing Recommendations

Recommended settings:

• Layer Height: 0.20 mm
• Walls: 3–4
• Infill: 15–25%
• Material: PLA, PLA+, or PETG

Supports:

• Supports are not strictly required, but they are recommended for best results.
• The holder was designed to print cleanly without supports on most well-tuned printers, but enabling supports can improve the underside quality of the angled opening and internal bridging areas.

Recommended support settings:

• Tree supports
• Build plate only

Orientation:

• Print upright as modeled.
• The geometry was designed to minimize support requirements while maintaining strength along the load path.

Notes

• PETG is recommended for garage or shop environments with elevated temperatures.
• The angled layout improves ergonomics compared to vertical holders while keeping cans securely retained.
• The open-frame design helps reduce material usage while still maintaining rigidity.

MultiBoard Compatibility

• Intended for use with the MultiBoard modular storage system
• Follows standard MU spacing conventions

Included Files

• MultiBoard Angled Spray Can Holder (5MU)

If you make remixes or size variants for other can diameters, feel free to share them.