This "thing" is all about presenting those CHEP cubes. You know what a CHEP cube is if you follow Chuck Hellebuyck on his Filament Friday YouTube channel (FilamentFriday.com). Chuck also has a very helpful website "CHEP Club" (www.chepclub.com). Both his CURA profiles and helpful videos on YouTube helped me be nothing but successful right from the start with my Ender 3 Pro. This stand will also hold any 20mm calibration cube.

The stand can be expanded horizontally and/or vertically using the "mending plates" and M3 screws (I used M3 hex socket button head cap screws). Typically I used M3x12mm or M3x14mm for the screws that go into the base plates and no longer than M3x8mm screws that go into the top of the backs to connect the next level above. There are also small clips that can be used to keep the base plates straight and not separate at the front. The clips come in large and small sizes although printing in PLA the small size typically works best. The large is provided for a slightly tighter fit.

Thank you Chuck for making this hobby so fun and removing all the stress out of getting started and being successful!

20mm Calibration Cube Stand (CHEP cube)

CHEP cube stand - tray A_B - mk5.stl

This is a modular stand for your 3DBenchy test prints.

The stand can be expanded horizontally and/or vertically using the "mending plates" and M3 screws (I used M3 hex socket button head cap screws). Typically I used M3x12mm or M3x14mm for the screws that go into the base plates and no longer than M3x8mm screws that go into the top of the backs to connect the next level above. There are also small clips that can be used to keep the base plates straight and not separate at the front. The clips come in large and small sizes although printing in PLA the small size typically works best. The large is provided for a slightly tighter fit.

The "tray" pieces are mirrored so they will seamlessly go side to side looking like continuous water surface if you alternate between tray A and tray B.

Sea Port Benchy - 3DBenchy Stand

3D Benchy - tray A - mk5.stl

This is a modular stand for your Phil A Ment test prints given they are printed at 50%. I sized Phil to 50% because that puts him at a size very similar to a basic 3DBenchy print.

The stand can be expanded horizontally and/or vertically using the "mending plates" and M3 screws (I used M3 hex socket button head cap screws). Typically I used M3x12mm or M3x14mm for the screws that go into the base plates and no longer than M3x8mm screws that go into the top of the backs to connect the next level above. There are also small clips that can be used to keep the base plates straight and not separate at the front. The clips come in large and small sizes although printing in PLA the small size typically works best. The large is provided for a slightly tighter fit.

The "tray" pieces are mirrored so they will seamlessly go side to side looking like continuous moon surface if you alternate between tray A and tray B.

Moon Base Alpha - Phil A Ment Stand

Phil A Ment - tray A - mk5.stl

This is a modular stand for your VORON Design calibration cubes.

The stand can be expanded horizontally and/or vertically using the "mending plates" and M3 screws (I used M3 hex socket button head cap screws). Typically I used M3x12mm or M3x14mm for the screws that go into the base plates and no longer than M3x8mm screws that go into the top of the backs to connect the next level above. There are also small clips that can be used to keep the base plates straight and not separate at the front. The clips come in large and small sizes although printing in PLA the small size typically works best. The large is provided for a slightly tighter fit.

There are two versions of the "tray" pieces. The only difference being the way the VORON Design logo is set in the tray.

VORON Design Calibration Cube Stand

VORON cube - tray A_B - mk6 (raised logo).stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

jmckerna

Achievements

Seedling

Trailblazer

20mm Calibration Cube Stand (CHEP cube)

Sea Port Benchy - 3DBenchy Stand

Moon Base Alpha - Phil A Ment Stand

VORON Design Calibration Cube Stand