Made a scaling tool, has a 5mm base, just import it into your software and theres a spike at each milestone height to line up with the eyes, theres also a rail of blobs to help scale based on head size if the character isn't standing upright.

Scale Tool

Full Tool.stl

The idea is for a pocket d4-d20.  There are 2 styles, one style should fit bearings in the center, which will then fit over the shaft, the other is made to be purely 3d printed.

There are also 2 different top/bottom pieces, with and without an indicator flag.

Let me know what you think, feel free to remix if you see a better way.
If you share out there in the world please lead people to Horseduck 3d printing on facebook and instagram.  I'm trying to start up, need followers!!!

D4 through D20 Spinner dial

Comes with 2 versions, one is to be 100% 3d printed, the other is measured to fit bearings in each dial. there are also 2 styles of top and bottom piece, one with a flag and one without. I haven't printed it yet I've been busy but give it a try, i had resin in mind since i haven't used my ender in a bit until recently. So in resin low detailed layer lines should be fine whereas in fdm you might wanna aim for .12 or lower to get the numbers.



all pieces- open and delete all but one at a time and save as to isolate.3mf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5173058.

love gnomes, love bulldogs, so i spliced a gnome with a bulldog and boom, be gentle, i'm not good at modeling, so the hair in the back could use some love. 

prints easy flat on Elegoo mars, not a lot of details so .05 should be fine, i printed mine in .03 cause i printed along with other stuff, just one support on each ear and drop your offset to 0.

in fdm printing flat without supports should be fine i think those ears can handle an FDM overhang but double check that before taking my word for it.

Dog Gnome

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4554900.

hey guys i made this super basic game piece mover based off the idea of those war movies where they use that stick thing to move soldiers around the map, the design is original i want to share with everyone whos interested i dont care if you market, remix it, or whatever, have fun with it. I made the whole thing in Tinkercad and tweaked its size and embellishments in 3d Builder.

for a topper i used busts with a 1/4' hole bored through the bottom in either tinkercad or 3D builder. also embossed the names and words on the pusher in 3D builder. sorry couldnt share the busts due to non derivative licenses.

the posts will fit on a 1/4' dowel maybe sanded down a tad, or on a pencil shaved down(or scaled up in software.

works in resin as well as FDM, FDM settings are .2 for basic, a little support if you need the post is at 60 degrees, .16 or .12 if you engrave it, very small print, takes about 17 minutes on.2

resin i just used the same profile i use for minis alongside the busts i made.

really its such a basic design any settings you use for regular printing should work

Tabletop Game Piece Pusher 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5192815.

Jumping on the bandwagon, made a rock rock, or the people's rock, if you will, i just took the head, a rock from the rock generator on Cults, merged them and here you go. no support needed.

prints great in fdm and resin.  Enjoy

The Rock rock

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5192810.

I saw a meme of a duck drawn like a horse, loved it.

I've printed it in fdm and resin works great on both, Enjoy.

Horseduck

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

horseduck3dprinting

Achievements

Seedling

Debutant