Hextraction tile dispenser Triple Tube 3d model

Hextraction tile dispenser Triple Tube

358 downloads · 3 years ago · Great for storage and acts as a tile deck to draw tiles randomly. Parts: - Triple-Tube holds 3x20 t

Description

Great for storage and acts as a tile deck to draw tiles randomly.

Parts:

Triple-Tube holds 3x20 tiles (410mm tall)
Triple-Tube-Top covers the top opening
Triple-Tube-Tab helps push the tiles out
Triple-Tube-Tab-Tail screws into the the Triple-Tube-Tab and acts as a rail

Be careful some of the triple tube components I published are for the 80% scale (those parts are marked in their file name!) so you'd have to scale them up 125% for the standard size tiles. If a filename doesn't mention 80% it is for the standard size though!

Please watch demo video: https://youtu.be/0m2UuSkd_6U

Tags:

Discussions

sciburger80006 months ago

Way too big, doesn't fit at all on the printer... please upload one thats segmented.

stormvexed2 years ago

I have been looking all over for tile carriers or management! This is way too tall to print on my printer, any chance to get a half as long version or maybe print in too parts file to help us noobs? :)

xxxxharbinger4 months ago

Have you tried changing the z scaling to fit your printer?

lucasyoung883 years ago

I think this is a solid idea but the design as-is does not work for me. Unless I'm doing something wrong. It was difficult to print, as the Triple-Tube-Tab and Triple-Tube-Tab-Tail are both (80%) so you have to realise before printing and scale them back up to 100% (125%). For me the screw broke in the socket twice, so I increased my infill to 25% and then scaled this down, so the 80% file was 9.6 x 9.6 x 45, which then scaled up to 12 x 12 x 45, which I then had to scale down to 11.5 x 11.5 x 43.12.

lucasyoung883 years ago

Additionally, If the Triple-Tube-Tab-Tail is facing up, it collides with the guide rail from Triple-Tube-Top, so you can never use the last ~100mm of the design, as the Triple-Tube-Top has a 78mm guide rail, and the Triple-Tube-Tab-Tail is 43.12mm, so they collide. Unless you orient the Triple-Tube-Tab-Tail the other direction and then they stick out the bottom. I'm going to need to cut the guide rails down manually to get this design close to working.