A unique fruit bowl made from 3d printed parts and commercially usual wooden skewers. It uses very little material and is easy to assemble.
Instructions
- Print the base
- Buy a pack of wooden skewers –26 are required (you can get them for a dollar in most super markets or online) Size: 200mm x 3mm
- Choose your tolerance: the design is provided with 0,1 for normal and 0.2 mm clearance for less accurate printers. Make your decision based on your experience with the accuracy of your machine. I used 0,1 and since the wood is soft it fits very well, and the skewers don’t fall out.
- Place the skewers with the pointy side in the base
- Enjoy!
Size assembled: 200 x 200 x 140 mm This is the V2, the V1 is still included.
Print settings Required build volume: 130 x 130 x40 mm Material usage: 20g Print time: 3h
Material: PLA Print direction: stl is rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none
Categories:
15 Likes45 DownloadsJune 5, 2023