gazzaladra

Fruit bowl “Sand”

by
gazzaladra
Follow
Follow
Remix Model
gazzaladra
gazzaladra
|
Image 2 of 6
Fruit bowl “Sand” 3d model
gazzaladra
gazzaladra
|
Image 2 of 6
Fruit bowl “Sand” 3d model
2D
3D
Makes
instagram-play
Fruit bowl “Sand” 3d model
Fruit bowl “Sand” 3d model
Fruit bowl “Sand” 3d model
Fruit bowl “Sand” 3d model
Fruit bowl “Sand” 3d model
Fruit bowl “Sand” 3d model
This model is restricted by licensing terms. 

A unique fruit bowl made from 3d printed parts and commercially usual wooden skewers. It uses very little material and is easy to assemble.

Instructions

  • Print the base
  • Buy a pack of wooden skewers –26 are required (you can get them for a dollar in most super markets or online) Size: 200mm x 3mm
  • Choose your tolerance: the design is provided with 0,1 for normal and 0.2 mm clearance for less accurate printers. Make your decision based on your experience with the accuracy of your machine. I used 0,1 and since the wood is soft it fits very well, and the skewers don’t fall out.
  • Place the skewers with the pointy side in the base
  • Enjoy!

Size assembled: 200 x 200 x 140 mm This is the V2, the V1 is still included.

Print settings Required build volume: 130 x 130 x40 mm Material usage: 20g Print time: 3h

Material: PLA Print direction: stl is rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none


16 Likes48 DownloadsJune 5, 2023


16 Likes48 DownloadsJune 5, 2023
This model is restricted by licensing terms.