tracking pixel
doritokllr

Logitech G Pro Keyboard Cover

by
doritokllr
Follow
Follow
Remix Model
doritokllr
doritokllr
|
Image 4 of 7
Logitech G Pro Keyboard Cover 3d model
doritokllr
doritokllr
|
Image 4 of 7
Logitech G Pro Keyboard Cover 3d model
2D
3D
Makes
Logitech G Pro Keyboard Cover 3d model
Logitech G Pro Keyboard Cover 3d model
Logitech G Pro Keyboard Cover 3d model
Logitech G Pro Keyboard Cover 3d model
Logitech G Pro Keyboard Cover 3d model
Logitech G Pro Keyboard Cover 3d model
Logitech G Pro Keyboard Cover 3d model

This is a cover for the Logitech G Pro TKL. They market this keyboard as a portable one but then when you put it into a bag odds are good some of the key caps are going to fall off at some point. I designed this cover to go over the keys and lightly clip onto the edges of the keyboard to protect them and there's a cover on the back to protect the USB connector from any damage as well.

There are 2 files as most cannot print this in one piece. Really you only need one file and then mirror it in your slicer but for those that don't know how both files are here.

2mm layer height 15% infill 4 top and bottom layers No supports needed if printed flat on the bed as the overhangs are shallow enough just about any printer with decent cooling can do them no problems.


0 Likes1 DownloadsJanuary 29, 2024



0 Likes1 DownloadsJanuary 29, 2024