Here's a little fun bit of trivia for you! I went to SDCC this year and managed to meet up with the coolest nerd (the Dowager of Nerds, as she proclaims) around, Felicia Day herself. I printed her a couple of HueForge prints as a keepsake - and I'm sharing one of the files with you today!
This is a HF print of the Guild comic book, best of the webseries of the same name. I was a huge fan back then and still am, and am so pleased that I got to share this with her. Print instructions, as usual, is below. The 3MF file will have all the settings loaded if you are using Bambu Studio.
Print Instructions: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 159.65x240.01mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.1
- PLA BambuLab Matte Dark Red Transmission Distance: 1.5
- PLA Flashforge Burnt Titanium Transmission Distance: 4
- PLA TECOR Light Blue Transmission Distance: 3.5
- PLA+ Sunlu Coffee Transmission Distance: 1.8
- PLA PolyTerra Pastel Peach Transmission Distance: 1.7
- PLA eSUn Cool White Transmission Distance: 2.7 This print uses 7 unique filaments
Swap Instructions:
- Start with Black
- At layer #17 (0.84mm) swap to Dark Red
- At layer #23 (1.08mm) swap to Burnt Titanium
- At layer #25 (1.16mm) swap to Light Blue
- At layer #29 (1.32mm) swap to Coffee
- At layer #33 (1.48mm) swap to Pastel Peach
- At layer #38 (1.68mm) swap to Cool White for the rest.
If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!
Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.