Starry Night x Gengar Hueforge print! Easy one, feel free to mess around with your own colours if you wish. The 3MF will have all the colour swaps already loaded for you!

Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 300x450mm in size You may print at higher layer heights below the Base Thickness of 0.6mm The Max allowed Thickness is 2.2mm and the Actual Thickness is 2.2mm

Filaments Used:

• #080a0d PLA PolyLite Black Transmission Distance: 0.3
• #55007f PLA Phaser3D Purple Sparkle Transmission Distance: 2
• #f55a74 PLA BambuLab Basic Pink Transmission Distance: 6.6
• #21bcff PLA TECOR Light Blue Transmission Distance: 3.5
• #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions:

• Start with Black
• At layer #11 (1mm) swap to Purple Sparkle
• At layer #17 (1.48mm) swap to Pink
• At layer #19 (1.64mm) swap to Light Blue
• At layer #21 (1.8mm) swap to White for the rest.