Taylor Swift Coaster

Every wanted to slam a cup on top of Taylor Swift's face? Well now you can :D This is a really quick print, about 35 minutes on the Bambu, with only one colour swap between the black and white colours.

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA Kingroon White Transmission Distance: 8

Swap Instructions:

• Start with Black
• At layer #6 (1.2mm) swap to White for the rest.