Chugging right along with the same 'Starry Night' theme, here's the Dark Knight himself, overlooking Gotham under a brilliant night sky.
5 colours this time, and if you have a less 'Lemon' yellow than I do, it will probably look a little nicer! 3MF is included for Bambu Studio and Bambu printers. If you don't have either, please download the STL and follow the print instructions below:
Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ Overture Dark Blue Transmission Distance: 1.8
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA CC3D Lemon Yellow Transmission Distance: 8
- PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
- Start with Black
- At layer #18 (0.88mm) swap to Dark Blue
- At layer #21 (1mm) swap to Teal
- At layer #32 (1.44mm) swap to Lemon Yellow
- At layer #42 (1.84mm) swap to Jade White for the rest.
If you'd like to support me, you can now subscribe to a Thangs membership!
Joining will give you access to a private discord, all paid models, as well as a commercial license to sell the physical prints of my models!
If a Thangs Membership is not your thing, I also have a Patreon!