Everyone's favourite One-Winged Angel, now HueForged to perfection.
The FF7 Remake / Rebirth version of Sephiroth is so pretty, I cannot NOT print him. This is a fairly simple print, just under 4 hours, with only 4 different colours. So only 1 AMS needed, or 3 manual colour swaps.
The included 3MF has all the necessary settings and filament swaps applied to the print if you use Bambu Studio. If you don't, or want to use your own settings - please use the STL and follow the instructions below!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA BambuLab Basic Red Transmission Distance: 5
- PLA CC3D Lemon Yellow Transmission Distance: 8
- PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
- Start with Black
- At layer #7 (0.68mm) swap to Red
- At layer #11 (1mm) swap to Lemon Yellow
- At layer #17 (1.48mm) swap to Jade White for the rest.
If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!
Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.
If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!