tracking pixel
cyanidesugar

Owl's Watching You - HueForge Print

by
cyanidesugar
Follow
Follow
Remix Model
cyanidesugar
cyanidesugar
|
Image 1 of 2
Owl's Watching You - HueForge Print 3d model
cyanidesugar
cyanidesugar
|
Image 1 of 2
Owl's Watching You - HueForge Print 3d model
2D
3D
Makes
Owl's Watching You - HueForge Print 3d model
Owl's Watching You - HueForge Print 3d model
This model is restricted by licensing terms. 

Want to have an owl staring at you 24/7? In black and white? Well, just print this!

3MF will have all layer swaps already loaded in. If you want to change the size, PLEASE only change the X and Y dimensions, and do not touch the Z.

Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

You may print at higher layer heights below the Min Depth of 0.44mm The Max Depth is 2mm and the Actual Depth is 2.1mm

Filaments Used:

  • PLA Kingroon Black Transmission Distance: 0.3
  • PLA Chrominal Penumbra Gray Transmission Distance: 6.9
  • PLA TECOR Beige Transmission Distance: 6.3
  • PLA Kingroon White Transmission Distance: 5.8 This print uses 4 unique filaments

Swap Instructions:

  • Start with Black
  • At layer 0.76mm swap to Penumbra Gray
  • At layer 1.32mm swap to Beige
  • At layer 1.64mm swap to White for the rest.

Have a hoot of a time printing this!


If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.



14 Likes38 DownloadsAugust 21, 2024


14 Likes38 DownloadsAugust 21, 2024
This model is restricted by licensing terms.