tracking pixel
cyanidesugar

Galaxy Walk - Hueforge Print

by
cyanidesugar
Follow
Follow
Remix Model
cyanidesugar
cyanidesugar
|
Image 1 of 3
Galaxy Walk - Hueforge Print 3d model
cyanidesugar
cyanidesugar
|
Image 1 of 3
Galaxy Walk - Hueforge Print 3d model
2D
3D
Makes
Galaxy Walk - Hueforge Print 3d model
Galaxy Walk - Hueforge Print 3d model
Galaxy Walk - Hueforge Print 3d model
This model is restricted by licensing terms. 

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used: - PLA Siddament Black Transmission Distance: 0.2 - PLA MAX CC3D Grass Green Transmission Distance: 2.6 - PLA META Sunlu Teal Transmission Distance: 5.4 - PLA META Sunlu Red Transmission Distance: 4 - PLA+ Sunlu Coffee Transmission Distance: 3 - PLA Overture Cream Transmission Distance: 8.4 - PLA META Sunlu White Transmission Distance: 9.6

Swap Instructions: - Start with Black - At layer #7 (0.44mm) swap to Grass Green - At layer #14 (0.72mm) swap to Teal - At layer #22 (1.04mm) swap to Red - At layer #30 (1.36mm) swap to Coffee - At layer #35 (1.56mm) swap to Cream - At layer #40 (1.76mm) swap to White for the rest.

Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.


5 Likes8 DownloadsSeptember 23, 2023


5 Likes8 DownloadsSeptember 23, 2023
This model is restricted by licensing terms.