This chameleon looks like it's popping out of the wall tiles - however, this print is only 2mm thick, and the illusion is the result of the amazing colour blending from the different filament colours!
The 3MF will have all necessary filament swaps already coded in if you're using Bambu studio. If you're not, you can download the STL in the attachments, and follow the following instructions:
Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA Siddament Purple Sparkle Transmission Distance: 5
- PLA Sunlu Lilac Transmission Distance: 6.6
- PLA Kingroon White Transmission Distance: 8
Swap Instructions:
- Start with Black
- At layer #11 (1mm) swap to Purple
- At layer #13 (1.16mm) swap to Lilac
- At layer #19 (1.64mm) swap to White for the rest.
If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!
Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.
If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!