tracking pixel
cyanidesugar

'Embroidered' Dragon - HueForge Print

by
cyanidesugar
Follow
Follow
Remix Model
cyanidesugar
cyanidesugar
|
Image 1 of 2
'Embroidered' Dragon - HueForge Print 3d model
cyanidesugar
cyanidesugar
|
Image 1 of 2
'Embroidered' Dragon - HueForge Print 3d model
2D
3D
Makes
'Embroidered' Dragon - HueForge Print 3d model
'Embroidered' Dragon - HueForge Print 3d model
This model is restricted by licensing terms. 

The Lunar New Year is almost upon us, and with it being the year of the dragon, I felt this was appropriate! It's entirely 3D printed, but the end result looks like it's an embroidered patch! If you need to resize this model, please only resize the X and Y dimensions and NOT the Z dimension!

The print model included (both the 3MF and the STL) are printed at 0.08mm layer height, however I also printed this at 0.04mm and the difference in quality was negligible. the 0.04mm version took approx 10 hours, so I have decided to provide the profile for the 0.08mm layer height which will only take about 5 hours or so on a Bambu Printer.

If you need to resize this model, please only resize the X and Y dimensions and NOT the Z dimension!

The 3MF has the layer swaps already coded in for Bambu Studio/Bambu printers, and uses 5 colours. You can get away with 4 and drop the orange layer, I reckon! If you're not using a Bambu printer, download the STL and use the following instructions:

Printing Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used:

  • PLA BambuLab Matte Charcoal Transmission Distance: 0.6
  • PLA BambuLab Basic Red Transmission Distance: 5
  • PLA CC3D Orange Transmission Distance: 8
  • PLA CC3D Lemon Yellow Transmission Distance: 8
  • PLA Kingroon White Transmission Distance: 8

Swap Instructions:

  • Start with Charcoal
  • At layer #7 (0.68mm) swap to Red
  • At layer #11 (1mm) swap to Orange
  • At layer #13 (1.16mm) swap to Lemon Yellow
  • At layer #19 (1.64mm) swap to White for the rest.

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!

Joining will give you access to a private discord, all paid models, as well as a commercial license to sell the physical prints of my models.

If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!



39 Likes99 DownloadsJanuary 24, 2024


39 Likes99 DownloadsJanuary 24, 2024
This model is restricted by licensing terms.