cbobo2uco1.7K followers

Print In Place Cyberpunk Capsules 3d model

Print In Place Cyberpunk Capsules

3K downloads · 3 years ago · Three pip capsules of varying sizes that utilizes planetary gears to operate. These were printed on

Description

Three pip capsules of varying sizes that utilizes planetary gears to operate. These were printed on my X1-Carbon and Elegoo Neptune 4 Pro with 5% infill, 2 walls, and .2mm layer height. I've added some updated versions of each capsule because there were some chamfers were missing from the originals.

Tags:

Community Makes (6)

Had a little difficulty getting it open at first, but I wiggled the petals and posts a bit and applied some PTFE lube to get it to open. Now it works wonderfully!

I ran out of white filament, and had to finish it up with black. But I love it! Took me a bit to get it to open, but haven't had a problem since. My nephew will love this for his D&D dice collection.

Community Makes (6)

Discussions

Glendon3d2 years ago

miak3D2 years ago

cyanidesugar3 years ago

cmlynch832 years ago

I ran out of white filament, and had to finish it up with black. But I love it! Took me a bit to get it to open, but haven't had a problem since. My nephew will love this for his D&D dice collection.

It's a lot bigger than I thought it was going to be, but I absolutely love it! 3d model

2GTech2 years ago

wilson6242 years ago

I had to wiggle the bottom ring back and forth continuously to break the parts free. I think the seam on the gears causes some welding or friction. Once it started to move slightly, I added some lubrication in the cracks of the gears from the bottom side. This made it move smoothly, almost too smooth.

smf.gentech1 year ago

Had a little difficulty getting it open at first, but I wiggled the petals and posts a bit and applied some PTFE lube to get it to open. Now it works wonderfully!

PrinterCreality K1 Max

SupportsNone

BrimNo

jtraymon00013 years ago

Its a dope model but the tolerancing isnt good. I still can't get mine to open, let alone move... ?

EDIT: To make model move/open, I had to pull out the center gear and the entire bottom to model. When it works, it's very cool.

olaf22023 years ago

Dann brauchst du ein Bambu lap, die schaffen das alle😀

dgezzell892 years ago

Printed beautifully but was fully fused. I broke the top tabs off trying to get the gears to turn. Has anyone remixed this with the gears printed seperately?

dumonster2 years ago

I printed this on a Bambu Lab A1 using the default settings for generic PLA silk (I used Eryone PLA Silk Black/Red). It looks GREAT and it took minimal effort to open it the first time. After 5 or 6 times it is now very easy to open. One of my favorite prints.

View all 13 discussions