A decorative house lamp. This model comes with two different bases. Just print whichever you like best. All parts were printed on a Bambu Labs P1S. You will need to print 1 x Adapter, 1 x Lamp Base, 1 x Lamp Base Top, 2 x Lamp Body Adapters, 1 x Lamp Body Left, 1 x Lamp Body Right, 4 x Petal 1's, 4 x Petal 2's, 4 x Petal 3's, 4 x Petal 4's, 4 x Petal 5's, 4 x Petal 6's, 8 x Petal 7's, 8 Petal 8's, and 1 x Stamen. Each Petal and the Stamen were designed with artificial brims marked with "Snap Off". They are to be removed after printing. Both Lamp Body parts, Adapter, and Lamp Base Top will need supports when printing. I printed each petal part with 3 walls and 0% infill. Each of the Petals from 8 to 1 will need to be inserted into Lamp Body Left and Right from bottom to top. The electrical socket with the Adapter simply slides into the Lamp base Top. You will not need to glue it in place. Please refer to photos. The electrical light socket I used for this lamp can be found here on Amazon.com. https://www.amazon.com/dp/B0C6F3CC6J?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 The lightbulb I used is the Cync full color direct connect smart bulb. You can find it at your local Walmart.