My design for Helldivers 2 dog tags. Download, enjoy and post a make!

At 100% dimensions are about: 55.6mm tall X 28.8mm wide x 4.8mm thick.

I did mine using satin black and silk gold, paused the print to change colors when the border started printing.

Print Settings

    Printer brand: Longer
    Printer: Longer LK5 Pro
    Rafts: No 
    Supports: No
    Resolution: .2
    Infill: 20%
    Filament brand: Longer
    Filament color: Gray
    Filament material: PLA

Created using Illustrator and Tinkercad.

Helldivers 2 Dog Tags

HD-DT.stl

Wolverine & Deadpool disk. Looking forward to seeing the new movie so I put this together based off of a graphic found online. Talented designers already uploaded the half heart pendent so I put together this circular one.

Eye on Deadpool side was glued into place. You can glue the 2 halfs together, drill a hole in one side and boom, you have a keychain.

Notes:
I have it set up as different pieces for multi color printing or easy painting. Also uploaded combined files.

DP.stl = Deadpool side * started black, stopped print and changed to red when lip started printing.

Wolv.stl = Wolverine side started yellow stopped print and changed to black when mask started printing.

Eyes-white.stl = separated out eyes. *they fit snug when I printed them, may require some sanding for fitment.

WD-combined-w-eyes.stl = everything combined into one object.

WD-combined-no-eyes.stl = eyes removed if you want to print them separate in white.

Scaling down would probably make the eye tolerances really tight. Mine fit snug at default size.

At 100% its about 75mm wide x 75mm tall and 6mm thick.

Design inspired by screenpai3d fan art found [here](https://www.reddit.com/r/marvelstudios/comments/y0jmcw/so_hyped_for_deadpool_3_that_i_made_this/) 

Print Settings:
Printer brand: Longer
Printer: Longer LK5 Pro
Rafts: No
Supports: No
Resolution: .2
Infill: 20%
Filament brand:  Esun / Elegoo
Filament color: Yellow / Black
Filament material: PLA



Wolverine & Deadpool logo / disk

DP.stl

eyes-white.stl

Wolv.stl

WD-combined-no-eyes.stl

WD-combined-w-eyes.stl

Recently printed out Deadpool and Wolverine masks and needed a stand. So I put this together. You will need a 3/4 inch wood dowel cut to your preferred length.

Plaque - has a notch in it so it can be glued on the base at an angle. You can also glue it facing straight up on the base if you like. I paused the print for the color change on mine. I did use supports on the notch in the plaque.

base-bottom.stl - This doesn't need to be printed unless you want the bottom covered. It is only 2mm thick so adjust the Z height in your slicer if you need it thicker.

Check my profile for the Deadpool Stand

Print Settings

   -  Printer brand: Longer
   -  Printer: Longer LK5 Pro
   -  Rafts: No
   -  Supports: Yes
   -  Resolution: .2
   -  Infill:  10
   -  Filament brand: Esun
   -  Filament color: Ruby Red
   -  Filament material: PLA
Notes: I printed everything but the plaque at .28 to save some time. Plaque was done at .2

Wolverine Helmet Stand

top.stl

Wol-base.stl

Wol-plaque.stl

base-bottom.stl

Recently printout Deadpool and Wolverine masks and needed a stand. So I put this together.
You will need a 3/4 inch wood dowel cut to your preferred length.

Plaque - has a notch in it so it can be glued on the base at an angle. You can also glue it facing straight up on the base if you like. I paused the print for the color change on mine. I did use supports on the notch in the plaque.

base-bottom.stl - This doesn't need to be printed unless you are gluing the eyes on like I did. It is only 2mm thick so adjust the Z height in your slicer if you need it thicker.

Check my profile for the Wolverine helmet stand

Print Settings

   -  Printer brand: Longer
   -  Printer: Longer LK5 Pro
   -  Rafts: No
   -  Supports: Yes
   -  Resolution: .2
   -  Infill:  10
   -  Filament brand: Esun
   -  Filament color: Ruby Red
   -  Filament material: PLA
   -  Notes: I printed everything but the plaque at .28 to save some time.
   -  Plaque was done at .2

Deadpool Helmet stand

DP-plaque.stl

DP-base.stl

DP-base-eyes.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bdubil

Achievements

Explorer

Seedling

Novice Maker

Up and Coming