Recently printout Deadpool and Wolverine masks and needed a stand. So I put this together.
You will need a 3/4 inch wood dowel cut to your preferred length.

Plaque - has a notch in it so it can be glued on the base at an angle. You can also glue it facing straight up on the base if you like. I paused the print for the color change on mine. I did use supports on the notch in the plaque.

base-bottom.stl - This doesn't need to be printed unless you are gluing the eyes on like I did. It is only 2mm thick so adjust the Z height in your slicer if you need it thicker.

Check my profile for the Wolverine helmet stand

Print Settings

   -  Printer brand: Longer
   -  Printer: Longer LK5 Pro
   -  Rafts: No
   -  Supports: Yes
   -  Resolution: .2
   -  Infill:  10
   -  Filament brand: Esun
   -  Filament color: Ruby Red
   -  Filament material: PLA
   -  Notes: I printed everything but the plaque at .28 to save some time.
   -  Plaque was done at .2

Deadpool Helmet stand

DP-plaque.stl

Recently printed out Deadpool and Wolverine masks and needed a stand. So I put this together. You will need a 3/4 inch wood dowel cut to your preferred length.

Plaque - has a notch in it so it can be glued on the base at an angle. You can also glue it facing straight up on the base if you like. I paused the print for the color change on mine. I did use supports on the notch in the plaque.

base-bottom.stl - This doesn't need to be printed unless you want the bottom covered. It is only 2mm thick so adjust the Z height in your slicer if you need it thicker.

Check my profile for the Deadpool Stand

Print Settings

   -  Printer brand: Longer
   -  Printer: Longer LK5 Pro
   -  Rafts: No
   -  Supports: Yes
   -  Resolution: .2
   -  Infill:  10
   -  Filament brand: Esun
   -  Filament color: Ruby Red
   -  Filament material: PLA
Notes: I printed everything but the plaque at .28 to save some time. Plaque was done at .2

Wolverine Helmet Stand

Wol-plaque.stl

Simple Deadpool Key Chain design.

*Added a V2 version with slanted eyes. Thought it looks a bit better.
files - DP-Key-V2.stl & DP-Key-V2-eyes.stl

Paused the print to change colors. Eyes are separated out to print in a 3rd color. Eyes were very snug on my machine. May need a bit of sanding to fit.

Download, enjoy and post a make.

Print Settings

Printer brand: Longer
Printer: Longer LK5 Pro
Resolution: .2
Infill: 20%
Filament brand: Esun / Elegoo
Filament color: silk red & black
Filament material: PLA

Deadpool Key Chain

DP-key.stl

DP-Key-V2.stl

DP-Key-V2-eyes.stl

Wolverine & Deadpool disk. Looking forward to seeing the new movie so I put this together based off of a graphic found online. Talented designers already uploaded the half heart pendent so I put together this circular one.

Eye on Deadpool side was glued into place. You can glue the 2 halfs together, drill a hole in one side and boom, you have a keychain.

Notes:
I have it set up as different pieces for multi color printing or easy painting. Also uploaded combined files.

DP.stl = Deadpool side * started black, stopped print and changed to red when lip started printing.

Wolv.stl = Wolverine side started yellow stopped print and changed to black when mask started printing.

Eyes-white.stl = separated out eyes. *they fit snug when I printed them, may require some sanding for fitment.

WD-combined-w-eyes.stl = everything combined into one object.

WD-combined-no-eyes.stl = eyes removed if you want to print them separate in white.

Scaling down would probably make the eye tolerances really tight. Mine fit snug at default size.

At 100% its about 75mm wide x 75mm tall and 6mm thick.

Design inspired by screenpai3d fan art found [here](https://www.reddit.com/r/marvelstudios/comments/y0jmcw/so_hyped_for_deadpool_3_that_i_made_this/) 

Print Settings:
Printer brand: Longer
Printer: Longer LK5 Pro
Rafts: No
Supports: No
Resolution: .2
Infill: 20%
Filament brand:  Esun / Elegoo
Filament color: Yellow / Black
Filament material: PLA



Wolverine & Deadpool logo / disk

WD-combined-w-eyes.stl

Wolverine keychain based on the latest wolverine & Deadpool logo.

Eyes are separate file so you can print them in a different color. I paused the print and changed colors when the mask started printing. The file has the mask raised up a bit to accomplish that.

At 100% it measures 95mm wide x 75mm tall x 6mm thick.

Eyes fit in nice at 100%, I had to glue them in, scaling down would probably cause the fit to be tight or require sanding.

Print Settings:
    Printer brand: Longer
    Printer: Longer LK5 Pro
    Rafts: No
    Supports: No
    Resolution: .2
    Infill: 20%
    Filament brand:  Esun / Elegoo
    Filament color: Yellow / Black
    Filament material: PLA


Wolverine keychain

Wolverine-key.stl

Helldivers2 dog tags - Helldive edition. One for the bot lovers and the bug lovers.
Download, enjoy and post a make!

At 100% dimensions are about: 55.6mm tall X 28.8mm wide x 5mm thick

I did mine using black and matte white, paused the print to change colors when the border started printing. Red is hand painted on.

Print Settings

- Printer brand: Longer
 - Printer: Longer LK5 Pro
- Rafts: No
- Supports: No
- Resolution: .2
- Infill: 20%
- Filament brand: Esun
- Filament color: black & white
- Filament material: PLA

Helldivers2 - Helldive Dog Tag - Bots & Bug edition

DT-helldive-bugs.stl

DT-helldive-bots.stl

**Get even more Liber-tea from your cup with a Helldivers coaster! **

Helldivers 2 Coasters I created, 2 slightly different variations. The version printed in the pictures is "coaster-2". Paused the printer and changed the color when the border / Skull started printing to get the dual color.

Works best with flat bottom cups. If there is an indent on the bottom it may not sit flat. Made the middle skull pretty large to accommodate different cup types.

Download, enjoy and post a make!

**Print Settings**

Printer brand: Longer
Printer: Longer LK5 Pro 
Rafts: No
Supports: No
Resolution: .28
Infill: 20%
Filament brand: Esun
Filament color: black & gold
Filament material: PLA

At 100% it is 101mm wide x 101mm deep x 6mm high.
Scale to the X & Y proportionally to fit your needs and adjust height if needed. I feel 6mm is good.

Printed a .28 layer height to save some time since it is all flat. Can be printed at .2 if you like.

Helldivers 2 Coasters

coaster-1.stl

Design I did using Helldivers 2 design elements.
Print it, enjoy and post a make!

I did mine using satin black and silk gold, paused the print to change colors when the skull started printing.

At 100% it measures 105mm wide x 59mm tall x 6mm thick
Its a little beefy as is for strength.
Scale x & y proportionally to meet you size needs, then adjust z to desired thickness.

**Print Settings**
Printer brand: Longer
Printer:  Longer LK5 Pro
Rafts: No
Supports: No
Resolution: .2
Infill: 20%
Filament brand: Esun
Filament color: black & gold
Filament material: PLA

 Helldivers 2 Keychain

helldiver-key-chain.stl

My design for Helldivers 2 dog tags. Download, enjoy and post a make!

At 100% dimensions are about: 55.6mm tall X 28.8mm wide x 4.8mm thick.

I did mine using satin black and silk gold, paused the print to change colors when the border started printing.

Print Settings

    Printer brand: Longer
    Printer: Longer LK5 Pro
    Rafts: No 
    Supports: No
    Resolution: .2
    Infill: 20%
    Filament brand: Longer
    Filament color: Gray
    Filament material: PLA

Created using Illustrator and Tinkercad.

bdubil

Achievements

Explorer

Seedling

Novice Maker

Up and Coming

Pinned models

Helldivers 2 Dog Tags

Wolverine & Deadpool logo / disk

Wolverine Helmet Stand

Deadpool Helmet stand

Deadpool Helmet stand

Wolverine Helmet Stand

Deadpool Key Chain

Wolverine & Deadpool logo / disk

Wolverine keychain

Helldivers2 - Helldive Dog Tag - Bots & Bug edition

Helldivers 2 Coasters

Helldivers 2 Keychain

Helldivers 2 Dog Tags