A simple tablespoon sized scoop with a very small handle. Good for storing in small canisters of things that you commonly need a tablespoon of, such as Seventh Generation Zero Plastic Dishwasher powder.

Tablespoon Measuring Scoop

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5156210.

I needed a carriage plate adapter for an MGN9 linear rail mod on my Ender 3. While the original was a good starting point, I wanted to be able to add heat set inserts for adding and removing the hotend mount that I use (HeroMe Gen 5). I also needed the carriage mounting screws to be countersunk so they didn't stick up above the plate.

I also threw together a quick linear rail stop for 2020 extrusions. These are meant to be mounted at the end of the linear rail to help protect from the carriage sliding off the rail.

Changes made: 

- Added counter sinks for the m3 screws to mount to the linear rail carriage
- Enlarged the mounting holes for the hotend housing
- Added thickness where the plate sits against the carriage and behind the top mounting hole, so that the heat set inserts wouldn't stick out

Ender 3 X-Axis MGN9 Linear Rail Carriage

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5172563.

This is a very simple wedge meant to elevate the back edge of a laptop for better airflow. It has an indentation to accommodate the feet of the laptop. You need to print two, one for each side. I suggest mirroring the part in your slicer.

Simple Laptop Stand

The X Carriage plate that is present in [Hero Me Gen 6](https://www.printables.com/model/39322-hero-me-gen6-master-suite) has completely wrong hole spacing to actually mount the base to it. This is a completely redesigned plate with the correct hole spacing.

FreeCAD file is included, in case anyone wants to remix.

Hero Me Gen 6 MGN9H X Carriage

This is a case for the Arducam OV5647. It was designed to fit on a Cam Boom for the Ender 3, though it should be trivial to make other holders that fit it.

The mounting hinge is sized for an M2 machine screw, and should be snug enough that a nut isn't needed, but can be used if desired.

This was designed in OpenSCAD, and the source files are included for ease of remixing. I'm not sure how consistent the tolerances on these cams are, and I only have one so it was designed to that.

Arducam OV5647 Case

Arducam_OV5647_back.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

ardichoke

Achievements

Seedling

Trailblazer

Tablespoon Measuring Scoop

Ender 3 X-Axis MGN9 Linear Rail Carriage

Simple Laptop Stand

Hero Me Gen 6 MGN9H X Carriage

Arducam OV5647 Case