Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2411700.

Quick adapter to replace the top triangular piece in the Metal Max hot end clamp. The new base then allows the Nimble to be bolted on top.

The adapter needs to be this thick as the nuts that hold the Nimble would otherwise interfere with the metal plate holding it. Now the nuts are inside the adapter.

Edit: Modified it to be able to print easier. I put a thin wall between the nut space and the bolt hole. Simply drill it out with a 3 mm drill. Also, the Filament hole is covered the same way. This is a 4 mm hole and a 2 mm hole.

If you have the effector with the quick clip wiring, check out the reworked adapter WagnerMark52 made, here That is also where the thin wall modification came from. Thanks Mark!

With an installed weight of less than 27 grams on your carriage/effector the Zesty Nimble is smallest and lightest extruder you can buy, it has ample torque and can be mounted in multiple orientations.

The Nimble is available from Zesty Technology.