Here is a collection of parts that allow you to use the Nimble Flex on any Creality type print head, as found on a lot of printers, like the CR-10, the Tevo Tornado, and others.

There are two main mount versions. One with nut traps and one with inserts.  
The Flex needs a post on the side of the breech, these designs have a separate post. This allows the top surface of the mount to be flat.

Included are 4 different hot end mounts. All hot end mounts use the default hot end cooling fan. The hot end mounts are for the standard Creality hot end (or Microswiss version), the E3D V6, the Mosquito, and the Copperhead hot ends. 

There are 3 different part cooling fans included, a 4010 radial fan, as found on the standard printhead, and two units to mount a 5015 radial fan. One for the left-hand side and one for the right-hand side.

Also included is a BL-Touch mount. All the mounts for the fans and the BL Touch are height adjustable. 

Finally, I also uploaded basic versions of the hot end mount and the left-hand and right-hand adjustable plates. You can use these to design your own mounts for fans or a specific hot end.

All the parts are in Step format. If you want the STL files, have a look here: 
[Thingiverse](https://www.thingiverse.com/thing:4851747)

Nimble Flex for Creality

Mount for the standard 4010 radial fan, including duct

40x10 Radial fan Left

The duct uses the standard screws used in the printhead to attach to the fan

40x10 Radial duct

Radial 40x40 fan

Mount for the 4010 fan, height adjustable.

40x10 radial Cooling fan holder

Assembly of the 5015 fan mount and duct for on the left side of the mount.

5015 Radial fan Left

Height adjustable holder for the 5015 fan

50x10 Fan holder left

Fan 5015

The duct that clips onto the 5015 opening. It should hold. If not, a drop of glue will hold it.

5015 Fan Duct Left

Assembly for the 5015 fan placed on the right-hand side of the Flex mount.

5015 Radial fan Right

Duct for the 5015. It should just clip on, if not a drop of glue will do.

5015 Fan Duct Right

5015 Fan holder right

Assembly of the hot end mount for the Creality standard type hot end. 

Creality hot end mount

The actual clamp for the hot end. Screw the hot end onto the clamp and then place the whole thing in the Flex mount

Creality hot end clamp

CR-hotend Simple

40x40 Fan

E3D V6 hot end mount

The clamp for the V6. Place the V6 in the clamp and fit the top of the V6 in the pocket of the Flex mount.

E3D-V6 hot end clamp

E3D v6 Simple

Body

Duct

Mosquito hot end mount

Clamp for the Mosquito hot end. Screw the Mosquito onto the mount and then place the whole assembly in the Flex mount. After installing it you can add the fan.

Mosquito hot end clamp

Mosquito Simple

Copperhead hot end mount

Clamp for the copperhead hot end. Screw the Copperhead onto the clamp and place into the Flex mount. 

Copperhead hot end clamp

Copperhead simple

Assembly of the base parts. You can use these parts as a base for your own designs. 
Included is the left-hand adjusting block, right-hand adjusting block, and the hot end clamp.

Base parts

Base  hot end clamp

Base sliding block right

Base sliding block left

Assembly for the height adjustable mount for the BL Touch 

BL Touch Mount

Height adjustable mount for the BL Touch.

V3 BL Touch mount

BLTouch

This is the assembly of the main mount for the Flex, this one is based on using inserts. 
It also includes the center support post and a mockup of the horizontal Flex. 

Flex_Mount Creality Inserts

Central support post needed for the central screw of the Nimble Flex. 

Flex central support

This is a mockup of the Nimble Flex in the horizontal position.

Mockup V3 Flex Horizontal

The is the main mount for the Nimble Flex. It is based on inserts.

Here are three models (mock-ups) of the Nimble V3 also known as the Flex. The Flex can be mounted in different ways with the drive cable positioned in steps of 22.5 degrees.
What these mock-ups give you are the main positions. Vertical, the default position, Forward, with the cable pointing slightly up and finally Horizontal, with the drive cable horizontally pointing to the back. 
For all positions, the bolt pattern is the same, it really is only to direction of the drive cable that can be changed.
On top of that, the Flex can be used right handed or left handed, it is ambidextrous. To use it in the other orientation, just mirror the file in your CAD environment.    

**Changelog:**

- 1 Initial release. 


** The Zesty Nimble V3**
These parts are **ONLY** for the Nimble Version 3 (the Flex).
With an installed weight of less than 25 grams on your carriage/effector the Zesty Nimble is the smallest and lightest extruder you can buy, it has ample torque and can be mounted in multiple orientations.

The Nimble is available from [Zesty Technology.](https://zesty.tech)

Mockup V3 Flex Forward.stp

Mockups for the Nimble V3 Flex

Mockup V3 Flex Horizontal.stp

This is an example of a mount for the Nimble V3 Flex. You can use it as a base for your own design. 
The Flex uses three screws to mount to the base. This base is designed with nut traps for the standard M3 nuts.  

**Changelog:**

- 1 Initial release. 


** The Zesty Nimble V3**
These parts are **ONLY** for the Nimble Version 3 (the Flex).
With an installed weight of less than 25 grams on your carriage/effector the Zesty Nimble is the smallest and lightest extruder you can buy, it has ample torque and can be mounted in multiple orientations.

The Nimble is available from [Zesty Technology.](https://zesty.tech)

V3_Flex_Mount-Base-Nut traps.stp

This is an example of a mount for the Nimble V3 Flex. You can use it as a base for your own design. 
The Flex uses three screws to mount to the base. This base is designed for using inserts. The insert used is a M3x5x5. 

**Changelog:**

- 1 Initial release. 


** The Zesty Nimble V3**
These parts are **ONLY** for the Nimble Version 3 (the Flex).
With an installed weight of less than 25 grams on your carriage/effector the Zesty Nimble is the smallest and lightest extruder you can buy, it has ample torque and can be mounted in multiple orientations.

The Nimble is available from [Zesty Technology.](https://zesty.tech)

V3_Flex_Mount-Base-inserts.stp

This is an example of a mount for the Nimble V3 Flex. You can use it as a base for your own design. 
The Flex needs a post on the side of the breech, this design has a separate post. This allows the top surface of the mount to be flat.

**Changelog:**

- 1 Initial release. 


** The Zesty Nimble V3**
These parts are **ONLY** for the Nimble Version 3 (the Flex).
With an installed weight of less than 25 grams on your carriage/effector the Zesty Nimble is the smallest and lightest extruder you can buy, it has ample torque and can be mounted in multiple orientations.

The Nimble is available from [Zesty Technology.](https://zesty.tech)

Nimble V3 Flex mount with flat base

This is an example of a mount for the Nimble V3 Flex. You can use it as a base for your own design. 
The Flex needs a post on the side of the breech, this design has a separate post. This allows the top surface of the mount to be flat.

This is the spacer that supports the Flex on the side of the breech. It is a simple cylinder.

Base spacer

This is the basic mount for the Flex with a flat top surface. 

V3_Flex_Mount-Base-Flat

Our focus is on creative engineering, but we also intend to deliver engineering that allows you to be creative. For instance, 3D printing. Here you will find all the public available designs we have on-line. Like mock-ups of our products and mounts and adapters for the Nimbles. 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Zesty.Tech

Achievements

Sequoia

Up and Coming

Explorer