Here are three models (mock-ups) of the Nimble V3 also known as the Flex. The Flex can be mounted in different ways with the drive cable positioned in steps of 22.5 degrees. What these mock-ups give you are the main positions. Vertical, the default position, Forward, with the cable pointing slightly up and finally Horizontal, with the drive cable horizontally pointing to the back. For all positions, the bolt pattern is the same, it really is only to direction of the drive cable that can be changed. On top of that, the Flex can be used right handed or left handed, it is ambidextrous. To use it in the other orientation, just mirror the file in your CAD environment.
Changelog:
- 1 Initial release.
** The Zesty Nimble V3** These parts are ONLY for the Nimble Version 3 (the Flex). With an installed weight of less than 25 grams on your carriage/effector the Zesty Nimble is the smallest and lightest extruder you can buy, it has ample torque and can be mounted in multiple orientations.
The Nimble is available from Zesty Technology.