![[BaBo duo] drawer module 90 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fattachments%2F5708ca0f-7287-4f21-aa73-9a7929db189e%2FBaBo_duo-drawer_90.jpg&w=3840&q=75)
![[BaBo duo] drawer module 90 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fattachments%2F5708ca0f-7287-4f21-aa73-9a7929db189e%2FBaBo_duo-drawer_90_assembly.jpg&w=3840&q=75)
![[BaBo duo] drawer module 90 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fthangs-thumbnails%2Fproduction%2Ff1e07a32-c0f0-44f4-8571-42e985337c5a%2FBaBo_duo_drawer_modul_90.png&w=3840&q=75)
Create your BaBo organizer! A system created to store them all!
Description: This is the BaBo duo drawer modul 90. It is a spin off from the BaBo organizer system and was designed to be used under the AMS. The AMS adapter must be mounted at the top. If you want to place this module on your printer and dont want to use the riser, I recommend using the 20mm feet so that the drawer does not collide with the display.
It is only compatible with the [BaBo duo] modules and not with the [BaBo] modules. But you can use all babo inserts.
The usable dimensions of the drawer are 240x120x90.
The drawer has space for 8x4 inserts. They are two drawers
The inserts have a grid of 30x30mm, this means a 1x2 insert has the dimensions 30x60mm.
BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws.
Update: (06/02/24)
- design optimizations to prevent warping ** Printing:** Layer height: 0.2 Supports: No Brim: No Material: all
**Assembly: **
Follow the instructions in the picture.
- printed parts
- 27 x M3x8 countersunk screws.