The original [SpoolCore](https://thangs.com/designer/Willi%203D/3d-model/SpoolCore-1075953?source=Recent) is designed to fit into as many spools as possible, which has some disadvantages. That's why I made the specialized variants that have been developed for the spools from the brands Sunlu and eSun. These have all the advantages of the original SpoolCore, but are easier to assemble and make better use of the space.

SpoolCore for brands

SpoolCore_eSun.3mf

**Create your BaBo organizer! A system created to store them all!**

**Description:**
This is the **BaBo duo AMS drawer stacker**. I designed this model to be able to stack several Bambu Lab AMS in a space-efficient manner.

For this purpose, the AMS are stored in a kind of drawer and can be pulled forward if necessary, while they are rotated so that the spools can be easily removed.

The AMS stakers can then be placed next to the printer or on the floor. Alternatively, there is also an option for mounting under a shelf or table. I also recommend attaching at least one staker to a wall to prevent it from tipping over. There are attachments with different lengths for this purpose.

There is also an optional solution to fix the cover of the AMS to the AMS above it with magnets during the spool change. (The upper AMS should not be empty)

BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws. 

**Update:**
(06/09/24)
- Connections of AMS frame changed for simplified assembly
- Side parts of the AMS frames changed to fit all versions.

(28/09/24)
- added Version 2 (Compatibility: V2 stacker can be stacked on V1 stacker. But parts of V2 cannot be swapped with V1 parts.)
- Splitted the side rails in two parts to make the assembly and maintaining easier, by make it possible to put in/out the AMS at any time.
- Increased stability through reinforcement in the back area.
- Various small changes for better assembly and functionality.

**Printing:**
I recommend after printing the first parts to try to assemble them to check the tolerances for the printer. You can use the XY Contour Compensation in Bambu Studio to adjust the tolerances if you have problems to assemble the parts. If you plan to wall mount the Stacker, then you don't need the X-support in the back. The 3MF include a plate that doesn't have this parts. Read the description of the plates.

Layer height: 0.2
Supports: Yes
Brim: No
Material: PETG (recommended), ABS, PLA (do not use Silk or Matte PLA)

**Assembly:**

**Please make sure that everything is fastened properly so that no one gets hurt or anything breaks. Approximately 8kg of weight will impact the construction per AMS stack.**

**Required parts**
per AMS stacker drawer
- printed parts
- 26 x M3x8 countersunk screws (ISO 10642)
- 4 x 608 ball bearing (DIN 625)

top mount (optional)
- printed parts
- 4 x M3x8 countersunk screws (ISO 10642)

magnet holder (optional)
- printed parts 
- 12 x Ø10x2 magnets


Assemble the left and right parts together. The left and right parts can then be screwed together in the middle. The side guide lock parts don't have to be assembled in this step but it helps if you screw them in to prepare the threads for an easier assembly later. If you plan to wall mount the Stacker, then you don't need the X-support in the back.



**Optional magnet holder for the AMS lid.**
Glue the magnets into the front part of the AMS frame (recesses from below) and into the magnet holders. Make sure that the poles of the magnets attract each other. Then stick a (as thick as possible) double-sided adhesive tape on the round side of the magnet holder. Hold the magnet holders against the magnets in the frame part so that they can align. The cover of the AMS can then be pressed against the magnet holders so that they stick together.

_Repeat the previous steps for additional AMS stackers. _

To connect the AMS stacks, the vertical spacers can be pushed into the side guides of the AMS stacks above and screwed together.

From this point on, it must be decided whether the AMS stacker will be mounted with the top or wall mount or should stand on a table or floor.

If you decide to use the **stackers on your table**, there must be space below the stacker so that the lowest AMS can be pulled out. [BaBo duo] modules can be installed for this purpose. The height of the modules should be at least 120mm.

Compatible module with height:

+60mm (free) [BaBo duo] mono drawer module 30

+90mm (paid) [BaBo duo] mono drawer module 60

+40mm (free) [BaBo duo] drawer modul 30

+70mm (free) [BaBo duo] drawer modul 60

+100mm (paid) [BaBo duo] drawer module 90

+40mm (paid) 3plates [BaBo duo] plate module 

+60mm (paid) 5plates [BaBo duo] plate module 

+64mm (paid) [BaBo duo] front lid module 60

At least attach the upper AMS to a wall or something else to avoid tipping over.

The top mount can be used when **mounting under a table or shelf**. In addition, the AMS stackers can be attached to a wall on the back.

You can mount the **AMS stacker to the wall** to save space. Tip: Using the top mount you can make you a shelf on the top. 

**Last step:**

Put the frame for the AMS together. Then insert the bearings to the sides and fix them with the screws. Screw the AMS to the frame from below. Be careful not to overtighten the screws. The frame assembly with the AMS is then inserted into the side guides. There are recesses in the front of the side guides for this.

**Wiring and connecting the PTFE tubes**
If you plan to connect multiple AMS units together, you will need to purchase the AMS Hub.

Connect the top or bottom AMS closest to the printer with the 6pin 1500mm cable included in the AMS hub. All other AMS's can then be connected to each other using the 6pin 510mm cable included in the AMS.

Then connect each AMS to the AMS hub with a sufficiently long PTFE tube. Make sure that the AMS can be pulled out.


[BaBo duo] AMS drawer stacker

BaBo_duo_AMS_stacker.3mf

V2_AMS_stacker_magnet_holder.3mf

V2_AMS_stacker_top_mount.3mf

V2_AMS_stacker_wall_mount.3mf

V2_AMS_stacker_wall_support_mounts.3mf

V2_BaBo_duo_AMS_stacker.3mf

**Create your BaBo organizer! A system created to store them all!**

**Description:**

This is the BaBo duo mono top lid module. This has a lid over the entire length of the BaBo duo drawers. It is compatible with the BaBo duo drawer and the BaBo duo mono drawer.

Thanks MarcoM for the help with testing.

BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws. 

**Printing:**
Layer height: 0.2
Supports: Yes
Brim: No
Material: all

 
**Assembly:** 
Follow the instructions in the picture.
- printed parts
- 13 x M3x8 countersunk screws.

[BaBo duo] mono top lid module 

BaBo_Duo_top_mono_lid_modul.3mf

**Create your BaBo organizer! A system created to store them all!**

**Description:**

This is the BaBo duo plate module. This can hold 3 or 5 plates and gives the drawer module more stability and prevents it from bending in the middle.

**It is only compatible with the [BaBo duo] modules and not with the [BaBo] modules**

BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws. 

Update:
(26/01/24)
- added 5 plate version

**Printing:**
Layer height: 0.2
Supports: No
Brim: No
Material: all (PETG for the springs)

**Assembly: **
Follow the instructions in the picture.
- printed parts
- 12 x M3x8 countersunk screws

[BaBo duo] plate module

BaBo_duo_plate_modul.3mf

BaBo_duo_plate_modul_5.3mf

**Create your BaBo organizer! A system created to store them all!**

**Description:**
This is the BaBo duo drawer modul 90. It is a spin off from the BaBo organizer system and was designed to be used under the AMS. The AMS adapter must be mounted at the top. If you want to place this module on your printer and dont want to use the riser, I recommend using the 20mm feet so that the drawer does not collide with the display.

**It is only compatible with the [BaBo duo] modules and not with the [BaBo] modules. But you can use all babo inserts.**

The usable dimensions of the drawer are 240x120x90.

The drawer has space for 8x4 inserts. They are two drawers

The inserts have a grid of 30x30mm, this means a 1x2 insert has the dimensions 30x60mm.

BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws. 

**Update:**
(06/02/24)
- design optimizations to prevent warping
**
Printing:**
Layer height: 0.2
Supports: No
Brim: No
Material: all

**Assembly: **

Follow the instructions in the picture.

- printed parts
- 27 x M3x8 countersunk screws.

[BaBo duo] drawer module 90

BaBo_duo_drawer_modul_90.3mf

**Create your BaBo organizer! A system created to store them all!**

**Description:**

This is the BaBo duo front lid module 60mm. Maximum space for larger items such as replacement sticker printing plates, 3DLAC spray cans and other stuff. Usable height 60mm.

BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws. 

**Update:**
(06/02/24)
- design optimizations to prevent warping

**Printing:**
Layer height: 0.2
Supports: No
Brim: No
Material: all

Assembly: 
Follow the instructions in the picture.
- printed parts
- 22 x M3x8 countersunk screws.

[BaBo duo] front lid module 60

BaBo_duo_front_lid_modul_60.3mf

**Create your BaBo organizer! A system created to store them all!**

**Description:**

This is the BaBo module expander. With the help of the expander you can expand your [BaBo] System in width if you have a lot to store. 

You can only expand the module with the same module. To do this, you have to print all parts of the module to be expanded again except for the side parts.

BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer.

Big thanks to Joe Valasko for the idea and testing.

**Update:**

(19/04/2024)
- added plate 6 version
- added duo plate 5 version
- changed top lid expander orientation 
 
**Printing:**

Layer height: 0.2

Supports: No

Brim: No

Material: all

[BaBo] module expander

BaBo_max_adapter.3mf

**Create your BaBo organizer! A system created to store them all!**

**Description:**
This is the BaBo front lid modul 90mm. Maximum space for larger items such as replacement sticker printing plates, 3DLAC spray cans and other stuff. Usable height 90mm.

BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws. 

**Update:**
(13/09/23) 
- assembly optimizations

(31/10/23) 
- improved connection between modules
- print profile optimizations

(24/11/23) 
- optimization of the locking mechanism

(26/01/24)
- design optimizations to prevent warping

**Printing:**
Layer height: 0.2
Supports: No
Brim: No
Material: all

**Assembly: **
Follow the instructions in the picture.
- printed parts
- 14 x M3x8 countersunk screws.

[BaBo] front lid module 90

BaBo_front_lid_modul_90.3mf

**Create your BaBo organizer! A system created to store them all!**

**Description:**
This is the BaBo front lid module 60mm. Maximum space for larger items such as replacement sticker printing plates, 3DLAC spray cans and other stuff. Usable height 60mm.

BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws. 
Join my club to expand this system and get access to exclusive modules.

**Update:**

(13/09/23) 
- Assembly optimizations

(31/10/23) 
-  improved connection between modules
-  print profile optimizations

(24/11/23) 
- optimization of the locking mechanism

(26/01/24)
- design optimizations to prevent warping

**Printing:**
Layer height: 0.2
Supports: No
Brim: No
Material: all

**Assembly: **
Follow the instructions in the picture.
- printed parts
- 14 x M3x8 countersunk screws.

[BaBo] front lid module 60

BaBo_front_lid_modul_60.3mf

**Create** your BaBo organizer! A system created to store them all!**

**Description:**
This is the BaBo drawer module 90. The usable dimensions of the drawer are 240x210x90mm. The drawer has space for 8x7 inserts. 

The inserts have a grid of 30x30mm, this means a 1x2 insert has the dimensions 30x60mm.

BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws. 

**Update:**
(13/09/23) 
- Assembly optimizations

(31/10/23) 
- improved connection between modules
- easier to push back the drawer
- print profile optimizations

(26/01/24)
- design optimizations to prevent warping.

**Printing:**
Layer height: 0.2
Supports: No
Brim: No
Material: all

**Assembly: **
Follow the instructions in the picture.
- printed parts
- 16 x M3x8 countersunk screws.

[BaBo] drawer module 90

BaBo_drawer_modul_90.3mf

**Create your BaBo organizer! A system created to store them all!**

**Description:**
This is the BaBo plate module. It can hold 3 or 6 plates. A spring mechanism makes access to the individual plates easy and comfortable.

BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws. 

**Update:**
(13/09/23) 
- assembly optimizations

(31/10/23) 
- improved connection between modules
- print profile optimizations

(26/01/24)
- design optimizations to prevent warping

(26/01/24)
- added 6 plate version

**Printing:**
Layer height: 0.2
Supports: No
Brim: No
Material: all (PETG for the springs)

**Assembly:**
Follow the instructions in the picture.
    - printed parts
    - 12 x M3x8 countersunk screws.

[BaBo] plate module

BaBo_plate_modul.3mf

BaBo_plate_modul_6.3mf

Hey guys, I completely redesigned the [BaBo duo] AMS drawer stacker (who actually comes up with these unnecessarily long names? 🤨) based on your feedback.Above all, the focus was on assembly and stability. That's why the AMS can now be removed and installed at any time. Furthermore, there is now a solution for wall mounting as well as many smaller improvements.Next I would like to develop a solution for routing the PTFE tube and try to incorporate further feedback.Regarding compatibility. The new V2 version can be stacked on top of the previous V1. However, the parts cannot be exchanged within the versions.<iframe title="YouTube video" allowfullscreen="true" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" frameborder="0" src="https://www.youtube.com/embed/29xndwWyQ-o" height="405" width="100%" data-lexical-youtube-start="" data-lexical-youtube="29xndwWyQ-o"></iframe><img height="3401" width="4535" alt="AMS_stacker-eingeschoben.jpg" src="https://thangs.com/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fposts%2F1d2578c8-77e5-4eea-b2f1-53c825ccb93b&amp;w=1200&amp;q=75" loading="lazy">

 Hey guys, I completely redesigned the [BaBo duo] AMS drawer stacker (who actually comes up with these unnecessarily long names? 🤨) based on your feedback. Above all, the focus was on assembly and stability. That's why the AMS can now be removed and installed at any time.  Furthermore, there is now

[BaBo duo] AMS drawer stacker V2

Thank you very very very much for your support, I wish you good business!
**Access to exclusive models**
Access to all of the creator's models in the Exclusive models section.
**Prioritized model requests.**
Your requests will be treated with priority.
**Models for commercial use**
Permission to use physical prints of selected exclusive models for commercial purposes during active membership.

Commercial use

Thank you very much for your support!
**Access to exclusive models**
Access to all of the creator's models in the Exclusive models section.

Club access

**Create your own battle droid army and take over the galaxy!**
Scale 1:9  (90% for 1:10)
May the force be with you!
Roger roger!

**Printing:**
Layer height: 0.1
Supports: No
Brim: No
Material: PETG, (ABS), (PLA)

**Assembly:**
The connections are designed and optimized for PETG, the use of PLA or ABS makes assembly more difficult.

It is better to rotate the knee and elbow joints than to push them into place.

In order to replicate the design of the B1 battle droid as closely as possible, I was forced to make some parts very fragile. Please be ready to reprint parts in case of breakage. Separate parts are located in the respective folders.


Star Wars B1 Battle Droid 2.0 Kit Card 

B1-card-color_1-card.stl

B1-card-color_1-no-frame.stl

B1-card-color_2-card.stl

B1-card-color_2-no_frame.stl

B1-card-color_3-card.stl

B1-card-color_3-no-frame.stl

**Create your BaBo organizer! A system created to store them all!
**
**Description:**

This is the BaBo drawer modul 30. The drawer module is the heart of the system as it carries the inserts and is therefore the main page of the system. 

The usable dimensions of the drawer are 240x210x30.

The drawer has space for 8x7 inserts. 

The inserts have a grid of 30x30mm, this means a 1x2 insert has the dimensions 30x60mm.

BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. 

It was important to me that even newbies could print and use the system, which is why all parts are printed without support and the parts are already pre-sliced.

The entire system uses only 1 type of screw, M3x8 countersunk screws. 

The modules are screwed together from bottom to top.

**Update:**

(13/09/23) 
- Assembly optimizations

(31/10/23) 
- improved connection between modules
- easier to push back the drawer
- print profile optimizations

(26/01/24)
- design optimizations to prevent warping

- Printing:
Layer height: 0.2
Supports: No
Brim: No
Material: all

**Assembly:**
Follow the instructions in the picture.
- printed parts
- 16 x M3x8 countersunk screws.

[BaBo] drawer modul 30

BaBo_drawer_modul_30.3mf

**Create a pit droid …. or more! (They work better in groups.)**

**Description:**

This is a KIT CARD of a pit droid. 

Scale 1:10

**Update:**

(24/08/23) 
- optimized printability of the pelvis

(18/08/23) 
- optimized  upper leg to pelvis fit

**Printing:**

Layer height: 0.1
Supports: No
Brim: No
Material: PETG, (ABS), (PLA)

Assembly: 
The connections are designed and optimized for PETG, the use of PLA or ABS makes assembly more difficult and the parts can break. 

Follow the instructions in the picture.

Star Wars Pit Droid Kit Card

Pit_Droid_Kit-no_frame.stl

Pit_Droid_Kit-card.stl

V1_AMS_stacker_top_mount.3mf

V1_AMS_stacker_magnet_holder.3mf

V1_BaBo_duo_AMS_stacker.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Willi 3D

Designer posts

[BaBo duo] AMS drawer stacker V2

Pinned models

Star Wars B1 Battle Droid 2.0 Kit Card

[BaBo] drawer modul 30

Star Wars Pit Droid Kit Card

[BaBo duo] AMS drawer stacker

SpoolCore for brands

[BaBo duo] AMS drawer stacker

[BaBo duo] mono top lid module

[BaBo duo] plate module

[BaBo duo] drawer module 90

[BaBo duo] front lid module 60

[BaBo] module expander

[BaBo] front lid module 90

[BaBo] front lid module 60

[BaBo] drawer module 90

[BaBo] plate module