Select a membership plan

Model is included in this plan
Available now

30% off
The Den
$10.50
/ month
when billed annually

Basic foundations for hobbyists and creators.

Deep archive access without needing immediate access to the newest releases.

This Tier includes:

  • Limited Monthly Downloads: 5 monthly downloads

  • The Baseline Archive: Instant access to established basic/legacy designs.

  • The Final Cascade: This tier serves as the retirement home for designs. All models overtime will eventually graduate and settle into this tier.

TERMS OF SERVICE:

  • File Protection: Digital files may not be sold, listed for free, posted elsewhere, or distributed in any manner.

  • Cancellation Policy: Upon subscription cancellation, you must immediately remove any commercial shop listings utilizing designs or models by Vixen Printz.

  • Intellectual Property: All digital products offered on Thangs are protected by intellectual property rights and remain the sole property of Vixen Printz.

  • Enforcement: Any shops or individuals found in breach of these terms will be held legally accountable.

Model is included in this plan
Available now

30% off
The Clever Kit
$17.50
/ month
when billed annually

A premium archive that grows as top-tier projects age

Positioned for active builders, The Clever Kit balances deep archive access with a steady influx of high-end models.

This Tier includes:

  • Unlimited Monthly Downloads

  • Commercial license: Authorization to sell physical 3D prints of these models.

  • The Premium Archive: Includes everything in The Den, plus established, mid-lifecycle flagship designs.

  • The Project Cascade: Top-Tier designs cascade directly into this tier upon the arrival of a new major project release (typically 8 ~ 12 months)

TERMS OF SERVICE:

  • File Protection: Digital files may not be sold, listed for free, posted elsewhere, or distributed in any manner.

  • Cancellation Policy: Upon subscription cancellation, you must immediately remove any commercial shop listings utilizing designs or models by Vixen Printz.

  • Intellectual Property: All digital products offered on Thangs are protected by intellectual property rights and remain the sole property of Vixen Printz.

  • Enforcement: Any shops or individuals found in breach of these terms will be held legally accountable.

Model is included in this plan
Available now

25% off
The Alpha Vault
$30.00
/ month
when billed annually

Sly by design. First to the hunt.

Built for power-users, early adopters, and commercial sellers who want the highest-engineered projects the exact moment they are finalized.

This Tier includes:

  • Unlimited Monthly Downloads: Uncapped access to the entire Vixen Printz ecosystem

  • Elite Commercial License: Authorization to sell physical 3D prints of newest flagship designs immediately upon release.

  • Instant Vault Access: Immediate access to new release project builds before anyone else.

  • The Exclusivity Window: Models released here remain strictly locked in the Vault. They stay exclusive until the next major project release arrives (typically 8 ~ 12 months), at which point they cascade down to the lower tiers.

  • Fuel the Next Build: Your subscription directly finances the long-term research & development required to bring future projects to life.

TERMS OF SERVICE:

  • File Protection: Digital files may not be sold, listed for free, posted elsewhere, or distributed in any manner.

  • Cancellation Policy: Upon subscription cancellation, you must immediately remove any commercial shop listings utilizing designs or models by Vixen Printz.

  • Intellectual Property: All digital products offered on Thangs are protected by intellectual property rights and remain the sole property of Vixen Printz.

  • Enforcement: Any shops or individuals found in breach of these terms will be held legally accountable.

Vixen Printz
Vixen Printz.416 followers
Follow
Vixen Printz.
Vixen Printz.
|
Image 1 of 2
3-Inch FPV Drone (Analog, 20x20 Stack) 3d model
Vixen Printz.
Vixen Printz.
|
Image 1 of 2
3-Inch FPV Drone (Analog, 20x20 Stack) 3d model
3-Inch FPV Drone (Analog, 20x20 Stack) video thumbnail
3-Inch FPV Drone (Analog, 20x20 Stack) 3d model
3-Inch FPV Drone (Analog, 20x20 Stack) 3d model

3-Inch FPV Drone (Analog, 20x20 Stack)

This model features the following parts:

  1. Bottom (PET-CF Recommended)
  2. Top (PET-CF Recommended)

Other non-3D printed components include:

  • Flight Controller, Electronic Speed Controller, Video Transmitter: Rush FPV Rush Mini 20x20 Stack/Combo (F7 Core / 30A Matrix ESC / 800mW VTX)
  • VTX Antenna: Rush FPV Cherry 5.8GHz 90 Deg. MMCX Antenna (RHCP)
  • Receiver: TBS Crossfire Nano RX
  • Battery: Tattu R-Line 850mAh 4S
  • Motor: iFlight XING 1504 3900KV
  • Propellor: EMAX Avan Mini 3x2.4x3 Tri-Blade 3" Prop
  • FPV Camera: Foxeer nano toothless FPV camera
  • M2 Screws
  • Racewire - RGB RACELITEWIRE MINI LED (Optional)
  • Battery Strap

Disclaimer: This product is designed for hobby and/or commercial use only. Users are responsible for ensuring compliance with all applicable local laws, regulations, and guidelines before using this product. Any misuse, improper handling, or use of this product in violation of local regulations is solely the responsibility of the user. The manufacturer and seller disclaim any liability for damages, injuries, or legal consequences resulting from improper use or non-compliance. By purchasing and using this product, you acknowledge and agree to these terms.

Community Makes (1)
Printed on a Qidi Plus 4
Bottom plate Pet-Cf
Canopy PPa-Cf (just because I wanted to try it out)

Running a SpeedBee 405 mini
Walksnail 1s VTX (had to print a 25x25 adapter out of PC to mount it. Probably going to switch to HdZero race V3 to make the electronics cleaner)
AxisFlying 1405.5 4600 Kv motors...

Any chance we can get a set TPU armguards, and mounting for a 25x25 FC? Overall Great model and can't wait to fly it (it's raining right now).
Printed on a Qidi Plus 4
Bottom plate Pet-Cf
Canopy PPa-Cf (just because I wanted to try it out)

Running a SpeedBee 405 mini
Walksnail 1s VTX (had to print a 25x25 adapter out of PC to mount it. Probably going to switch to HdZero race V3 to make the electronics cleaner)
AxisFlying 1405.5 4600 Kv motors...

Any chance we can get a set TPU armguards, and mounting for a 25x25 FC? Overall Great model and can't wait to fly it (it's raining right now).


Community Makes (1)
Printed on a Qidi Plus 4
Bottom plate Pet-Cf
Canopy PPa-Cf (just because I wanted to try it out)

Running a SpeedBee 405 mini
Walksnail 1s VTX (had to print a 25x25 adapter out of PC to mount it. Probably going to switch to HdZero race V3 to make the electronics cleaner)
AxisFlying 1405.5 4600 Kv motors...

Any chance we can get a set TPU armguards, and mounting for a 25x25 FC? Overall Great model and can't wait to fly it (it's raining right now).
Printed on a Qidi Plus 4
Bottom plate Pet-Cf
Canopy PPa-Cf (just because I wanted to try it out)

Running a SpeedBee 405 mini
Walksnail 1s VTX (had to print a 25x25 adapter out of PC to mount it. Probably going to switch to HdZero race V3 to make the electronics cleaner)
AxisFlying 1405.5 4600 Kv motors...

Any chance we can get a set TPU armguards, and mounting for a 25x25 FC? Overall Great model and can't wait to fly it (it's raining right now).

Discussions
Vincent F
formysnz
Printed on a Qidi Plus 4 Bottom plate Pet-Cf Canopy PPa-Cf (just because I wanted to try it out) Running a SpeedBee 405 mini Walksnail 1s VTX (had to print a 25x25 adapter out of PC to mount it. Probably going to switch to HdZero race V3 to make the electronics cleaner) AxisFlying 1405.5 4600 Kv motors... Any chance we can get a set TPU armguards, and mounting for a 25x25 FC? Overall Great model and can't wait to fly it (it's raining right now).
Printed on a Qidi Plus 4
Bottom plate Pet-Cf
Canopy PPa-Cf (just because I wanted to try it out)

Running a SpeedBee 405 mini
Walksnail 1s VTX (had to print a 25x25 adapter out of PC to mount it. Probably going to switch to HdZero race V3 to make the electronics cleaner)
AxisFlying 1405.5 4600 Kv motors...

Any chance we can get a set TPU armguards, and mounting for a 25x25 FC? Overall Great model and can't wait to fly it (it's raining right now). 3d model
MaterialPET-CF
Layer height0.2 mm
Infill density100 %
SupportsTree
BrimNo
Vixen Printz
Vixen Printz.

Awesome make, very clean print (settings dialed in) and looks that you added fuzzy skin too 😎. Will be making a v2.0 of this frame soon and will involve TPU guards, as well as different mounting sizes. Stay tuned!

3-Inch FPV Drone (Analog, 20x20 Stack)

61 downloads · 1 year ago in  and 
Vixen Printz
Vixen Printz.416 followers
Follow