Note: Frame optimized for NewBeeDrone Hummingbird 255 AIO (25.5 × 25.5 mm) and 9 × 9 mm motor mounting

This model features the following parts:

1. Unibody Frame (PET-CF Recommended)
2. Side Panel (PETG Recommended)
3. Motor Wire Cover (PETG Recommended)
4. Landing Skid (TPU Recommended)
5. FPV Camera Mount (TPU Recommended)
6. GPS Mount (TPU Recommended)
7. RX Mount - Mirrored (TPU Recommended)
8. RX T-Antenna Mount (TPU Recommended)
9. XT30 Mount (TPU Recommended)
10. Dual VTX Antenna Mount (TPU Recommended)
11. Mounting Feet (TPU Recommended)
12. Soldering Jig (PLA Recommended)

Other non-3D printed components include:

• AIO (All-In-One) Board - Hummingbird 255 AIO Flight Controller (Optimal for Build)
• Receiver - Foxeer ELRS 2.4G RX LNA w/ T-Antenna
• Battery - GNB 4S - 850 mAh Lipo Battery XT30
• Battery Strap (Accomodates 15mm wide strap)
• Motor - 4 x XING2 1404 3800KV (Accomodates 9mm x 9mm motor mounting)
• Propellor - 4 x 3520 - Triblade Gemfan Propellor
• FPV Camera - Dji O4 air unit pro
• GPS - GEP-M10 Nano
• 16 x M2-5mm screws (4 per Motor)
• 12 x M2-4mm screws (for mounts, panels, and mounting feet)
• 12 x M2-7mm screws (for propellors and DJI O4 Module Cover)

Disclaimer: This product is designed for hobby and/or commercial use only. Users are responsible for ensuring compliance with all applicable local laws, regulations, and guidelines before using this product. Any misuse, improper handling, or use of this product in violation of local regulations is solely the responsibility of the user. The manufacturer and seller disclaim any liability for damages, injuries, or legal consequences resulting from improper use or non-compliance. By purchasing and using this product, you acknowledge and agree to these terms.